Search found 943 matches

Actual Results

Post Posted: April 11th, 2010, 9:49 am

Hello everyone... :D
I have a laptop that 5 minutes after it boots freezes, I have checked for viruses and its completely free of them. I have even gone a s far as reinstalling the OS, just to make sure, but the problem persists

can anyone help me?

thanks

Post Posted: January 21st, 2010, 2:48 pm

thanks grinch for your response; but when you say "as long as I have a route to it" do you mean, that I have to set up the router to have access to both subnets?

thank you again

Post Posted: January 20th, 2010, 9:32 pm

hello everyone. is it possible to access a computer that its located in the same building but with a different subnet http://img42.imageshack.us/img42/4373/net2m.th.jpg hopefully the diagram above my help understand, what I'm trying to accomplish. I'm trying to access the Desktop...

Post Posted: November 25th, 2009, 4:41 pm

What I dont understand its why is taking so much memory, I did the same thing with me Dell Poweredge 1750, and It shows close the amount that I upgraded it to.

Image

Will it be a good Idea to reduce the page file?...

Post Posted: November 24th, 2009, 6:10 pm

I have a HP Proliant DL380 G3 with windows server 2003 (enterprise edition)I recently upgraded the memory from 3 gbs to 5 gbs, BIOS shows that I do have 5 gbs, but when I go to Control Panel-->Systems, on the general info tab, it only shows 3.75 gbs :? ..... could anyone please help me figure thi...

Post Posted: November 2nd, 2009, 2:45 pm

I think I have found what my problem is, according with the Dell website below http://en.community.dell.com/forums/p/18681258/18805865.aspx?c=us&l=en&cs=&s=gen I need a RAID key as well as a battery and a memory, in order to activate my RAID controller. I don't know how much of this is t...

Post Posted: November 1st, 2009, 9:33 am

I'm thinking Server 2003, I was planning on Server 2008 but as long as I have a CD drive that wont be happening. :) .... As for the RAID controller, the reason I insist so much in that I have a RAID controller already, is because when I open the Server case, It says "RAID" where the RAID c...

Post Posted: November 1st, 2009, 9:08 am

Thanks for your response Don2007 What do you mean, you don't have an OS installed? You showed us a Windows device manager. Yeah; it doesn't have an OS installed, this is a screen shot before the original HDD was taken out(that's when I bought the other three I have now)... as for a RAID controller, ...

Post Posted: October 31st, 2009, 9:52 am

Hello everyone it has been a while since the last time I posted in here :lol: , Anyways I was wondering if guys could lend me a hand in creating a RAID 1 volume using three HDD of 36GB each, I have been searching for days in Google, trying to find a solution to this, however I must not be doing it r...

Post Posted: January 25th, 2009, 9:54 am

Thanks for your time and patience guys. I do appreciate your help

Thank you
Sincerely
Shadow Knight

Post Posted: January 20th, 2009, 7:15 pm

how old is the battery?
maybe is time to get a new one....

Post Posted: January 20th, 2009, 4:41 pm

Thanks for your response ATNO. I think I should have make this clear from the first post (silly me :oops: :oops: ) the business I’m trying to help is call Asher Health Care (that’s where the AHC comes from, and how I named their domain controller) The business Domain site its http://www.ashercare.co...

Post Posted: January 18th, 2009, 8:39 pm

didnt have any effects on the Exchange server, I still can send/recieve in the network, but can only send across the internet.

any other Ideas? :(

Thanks for the help and patience

Post Posted: January 15th, 2009, 8:33 pm

how can I point it to the server?...

Post Posted: January 15th, 2009, 4:39 pm

Well I checked the event viewer but so far I did not get any errors, here is a screen shot of all the events http://img212.imageshack.us/img212/2241/dnsyn2.th.jpg Any other suggestions? Also here is a screen of my dns server, http://img120.imageshack.us/img120/5189/dn...

Post Posted: January 13th, 2009, 6:32 am

Thank you guys for your replies, I did as you guys suggested without success, I try opening the 110 port on my windows firewall and router firewall, and nothing happen I disabled the windows firewall and had the same problem still. I also try adding the mx records as suggested on the website u gave ...

Post Posted: January 11th, 2009, 7:26 pm

Hello everyone, I know this may be a bit late to say; but since is my first post since last year, then HAPPY NEW YEAR!!!! Yay!!!... Rofl.. anyways I was wondering if any of you guys could give me a hand sorting out this problem, I’m new to exchange 2003 and I recently install exchange server 2003 on...

Post Posted: December 30th, 2008, 8:39 am

Please download hijackthis from the following link:

http://www.download.com/Trend-Micro-Hij ... ?tag=mncol

and post the log here so that we can help you better to solve this issue

Thank you

Post Posted: December 30th, 2008, 8:34 am

You can usually fix this by restarting your router, I come across this problem from time to time(not to often either) where I must restart the router to get a wireless connection.

hope it work, please let us know. thank you

Post Posted: December 22nd, 2008, 5:58 am

Don2007 its right, whenever you install a new OS, the OS may not have the drivers for some of your computer hardware, so it is necessary to go to the computer's manufacturer website and download the drivers for those components

Post Posted: October 28th, 2008, 5:13 am

If you know the IP address and server name of the DC with Active Directory add an entry for it in your hosts file, reboot your computer and attempt to join again. If I follow this step, will I still need to add the computer to the domain using the normal steps? Thanks in advance Sincerely Shadow Kn...

Post Posted: October 28th, 2008, 5:10 am

Hello again Eksotik, your log seems to be clean, however, I suggest you wait for a second opinion, because I may have miss something.


Sincerely
Shadow Knight

Post Posted: October 27th, 2008, 5:17 am

Hello Eksotik welcome to the ozzu forum. To further help you please download hijackthis software located in the following link http://www.download.com/Trend-Micro-HijackThis/3000-8022_4-10227353.html?tag=mncol&cdlPid=10781312 and post a log from that software. Thank you Sincerely Shadow Knight

Post Posted: October 27th, 2008, 4:16 am

if I try ping the domain, it will give me a Request time out messege back.

Post Posted: October 26th, 2008, 9:38 am

Hello everyone.. I have been trying to connect a XP Pro Sp3 workstation to a Server 2003 Domain, however I cant do it because every time I try I get an error saying that the domain could not be contacted, The workstation its able to connect to the network, and even access the internet, also if I try...

Post Posted: July 21st, 2008, 12:47 pm

I dont know if this counts, but I can view the site locally, however other computers outside the network cant display the site, there is where I have my problem...and I have open port 80 on my router, and I still have the same results.... as for my ISP I have bellsouth and I have a static IP... Do y...

Post Posted: July 21st, 2008, 12:25 pm

Hello everyone Is it possible to host a website on your own machine (Server 2003), in the world wide web? If it is could you guys explain this to me or give me site where there may be a tutorial... I have been searching the net, but I have only found sites that tells you how to do it localy(intranet...

Post Posted: May 21st, 2008, 12:14 pm

Thanks for your reply, I have an adicional question
Would it work the same using Windows movie maker?

Thank you

Post Posted: May 20th, 2008, 3:18 pm

Hello guys
I’m new to all this adobe after effect software, and I was wondering if any of you guys could guide me or give me a tutorial link on how to cut parts out of a video.

Any help would be appreciated

Thank you
Sincerely
Shadow Knight

Post Posted: May 13th, 2008, 7:24 pm

I finaly got it, problem solve, this is how the code should have been [code]mCustomer.ContractPrice = ContractTextBox.Text             If Deposit1TextBox.Text = "" Then             mCustomer.Deposit1 = 0           Else             mCustomer.Deposit1 = Deposit1TextBox.Text         End If   ...

Post Posted: May 1st, 2008, 7:04 pm

thanks for your reply, however something I forgot to mention on my earlier post was that this error only occurs when Im trying to save new data ito the database, when its pulling information out of it, and I update that info and save it, it saves it successfully, whiout any errors. And I just cant s...

Post Posted: April 26th, 2008, 7:58 am

Hello everyone, I have been trying to solve this issue, but I dont seem to get anywhere, I think I have it all right, but yet I it doesnt work and in the end when I hit the save button (in the form) I end up with the following error http://img73.imageshack.us/img73/9752/vberroroi5.th...

Post Posted: March 18th, 2008, 2:37 pm

Problem Solve....The problem was simple, I forgot to change the path of the database. duh!!!! rofl,

thanks a lot for your help Spork, you have been very helpful.

Post Posted: March 17th, 2008, 3:50 pm

I did however after I try runing it on another computer, it will display an error before it will run, and then after is running the listbox that is suppose to have all the customer names is blank, and will not pull the customer information from the Microsoft Access database. This is the error screen...

Post Posted: March 16th, 2008, 10:08 am

Hello everyone. I was wondering if any of you guys could help me with this, for you see I have made a small application, that will pull customer information out a Microsoft Access database sheet, it works fine. However I have no Idea on how to make this small application run on another computer, if ...

Post Posted: January 26th, 2008, 12:42 am

anyone?

Post Posted: January 20th, 2008, 7:05 pm

no the disk looks intact

Post Posted: January 20th, 2008, 4:41 pm

Hey everyone, how is it going? So, Im trying to intall Windows XP sp2, however I have not been able to do so, Everytime the it starts the process of copying the files for the OS installation it doesnt get pass 30%, I have no idea of what to do, I have replace hard drives, even the CDrom and still do...

Post Posted: December 6th, 2007, 6:13 am

Maybe your PC feels cold when you are not near her, you need to give her some more company... lol j/k

Post a hijacthis log to help us better

Post Posted: December 6th, 2007, 6:10 am

I know is a little early for this but I was just wondering, what would you like Santa to bring you this Christmas :lol:

Post Posted: December 6th, 2007, 6:07 am

Hello everyone

Could you guys please tell me what is in YOUR opinion the best antivirus out there and why do you prefer this AV over any other?

thank you

Post Posted: November 9th, 2007, 8:16 pm

Ok, Thanks

Post Posted: November 8th, 2007, 8:20 pm

umm, thanks..lol... but from what I read, this entry has to do with my Audio card driver... if is deleted I will not be able to update my driver in the future... http://www.processlibrary.com/directory/files/alcmtr http://www.bleepingcomputer.com/startups/ALCMTR.EXE-240.html Should I still go ahead ...

Post Posted: November 8th, 2007, 7:04 pm

Yep, it looks clean to me... Logfile of Trend Micro HijackThis v2.0.0 (BETA) Scan saved at 9:02:43 PM, on 11/8/2007 Platform: Windows XP SP2 (WinNT 5.01.2600) Boot mode: Normal Running processes: C:\WINDOWS\System32\smss.exe C:\WINDOWS\system32\winlogon.exe C:\WINDOWS\system32\services.exe C:\WINDOW...

Post Posted: November 8th, 2007, 5:26 pm

Thanks for your confidence on me ATNO/TW, and for the Tips, however I did remove the virus before reading this post using Prevx 2.0. But since sometime you can really rely on softwares to remove certain malwares, I'll safe this tip for future reference.

Angain thank you all for helping me.

Post Posted: November 6th, 2007, 6:44 am

Thanks Don for the quick reply. However, This virus I have been trying to remove it using Hijackthis, but so far is have been ineffective,
Is there another way to get around this?

Thanks

Post Posted: November 6th, 2007, 6:09 am

Hey everyone. I have been trying to remove a virus from my computer since yesterday, but havent found a way to do so yet, it keeps coming back, I was hoping you guys could help me with this here is my log Logfile of Trend Micro HijackThis v2.0.0 (BETA) Scan saved at 8:06:13 AM, on 11/6/2007 Platform...

Post Posted: October 29th, 2007, 3:55 pm

Hello everyone.

Do you guys know by any chance any good website that provides vb 2005 tutorials?

thanks

Post Posted: September 15th, 2007, 9:08 pm

my computer has a nasty virus that I dont now to get rid off, an anyone help me? Thank you all here is my hijackthis log Logfile of Trend Micro HijackThis v2.0.0 (BETA) Scan saved at 12:07:54 AM, on 9/16/2007 Platform: Windows XP SP2 (WinNT 5.01.2600) Boot mode: Normal Running processes: C:\WINDOWS\...

Post Posted: September 6th, 2007, 6:09 am

Bogey can you post a hijack log, so that we can go through it. Also I know some may disagree with me, but I dislike McAfee, because it most of the time it would not find viruses in my computer, after I swich to Avast, I have had my computer clean, and never had any problems. Try using it instead of ...

Post Posted: September 6th, 2007, 5:26 am

well I have try in Safe mode and normal mode, and have the same result, when spybot is about to finish like at 75% of the scanning process it just turns off. I guess I'll try another software.

Post Posted: September 4th, 2007, 6:10 am

Thank you all for your helpfull replies.

From the biginning I did not think it was an overheating issue, but now Im starting to wonder. Last temperature I record was 50 celsius before shutting down. Would that temperature be to high or is it normal?

Post Posted: September 3rd, 2007, 8:15 am

Greeting everyone. Lately I have been having a wierd problem with my laptop, and this problem consist in that everytime I run spybot, my laptop will turn off, like if it was a unplugged from the power source. The battery is at full when this happens and I also have it plug to the electric outlet, on...

Post Posted: September 1st, 2007, 1:29 pm

Im not very familiar when it comes to this Network admin topic, can you explain me what is wrong with those question?

Post Posted: September 1st, 2007, 12:29 pm

Hello everyone, hope everyone is alright. Anyways. Recently I have a professor that gave me an assigment of going to any company to as certain questions to the Network Admin about how their network is set up. However I dont have any big company near by. So I was wondering if any Ozzu member that is ...

Post Posted: August 3rd, 2007, 6:58 pm

Sounds good.... I myself like Dlink as well, but Im afraid of going technical issues, I'll probably end up buying thet Dlink NAS.
thanks for your help

Post Posted: July 27th, 2007, 3:48 pm

Thank you GT500Shlby. I was reading some reviews about the D-Link NAS, but there were a lot of costumers complaining about them.

http://www.newegg.com/Product/ProductRe ... 6822155003

I wasnt able to find any Webietech NAS

Again Thank you

Post Posted: July 25th, 2007, 3:08 pm

anyone?

Post Posted: July 22nd, 2007, 1:53 pm

Can anyone please tell me what is the best (in your opinion and personal experiense) NAS out there, that has 2 - bay HD and a 10/100/1000 Lan speed?

:twisted: :D
Thank you

Post Posted: July 11th, 2007, 5:25 pm

could you tell us which is your router brand? and which ISP provider do u use?

u see I have a Netgear Router and Bellsouth DSL, I couldnt connect to the net because there was a conflict between the DSL and the router's IP, all got fix by changing the router's IP.

Post Posted: July 11th, 2007, 5:13 pm

Well I like this forum becuase I have learn a great deal of stuff. Most of the members are great people who do their best to help you out. And because I have fun while learning or helping others.

Post Posted: July 10th, 2007, 1:59 pm

Rofl, those are all great suggentions, Unfortunately its not a girls, but I'll keep it in mind :twisted: angain thanks for the suggestions, I guess for now I'll stick to SpooF's idea until I get more costumers :) , and if they are not happy with my pricing, I'll just show the geeks squad's rates, th...

Post Posted: July 9th, 2007, 4:28 pm

rofl, that was a nice trade.

but yeah Im finding myself doing this more often, I was doing it for free, but now I want to get paid for it, lol, it was time I started doing this. :)

Post Posted: July 9th, 2007, 3:30 pm

Its ok Alkatroz, thanks a lot
I will get back to you as soon as I have the screenshots

again thank you

Post Posted: July 9th, 2007, 3:24 pm

Hello everyone.. I dont know if Im posting in the right forum, but if I did, well then it wasnt me who did it, I blame my neighbor. :lol: Anyways there is person who wants me to install a OS in his PC, because he does not know how to, I said I would, but for a price; However Im not sure what to char...

Post Posted: July 5th, 2007, 5:17 pm

In other words, this one is not dangerous. Ok, is clean, so it seems... for some reason the same viruses keep coming back, every time the computer is started the antivirus (avast pro) tells me that it has found a viirus (in the system32 folder) and what is funny about this is, that everytime it come...

Post Posted: July 3rd, 2007, 9:22 pm

Hello everyone, can any of you guys please check this log for me. Thanks Logfile of HijackThis v1.99.1 Scan saved at 12:19:27 AM, on 7/4/2007 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v7.00 (7.00.6000.16473) Running processes: C:\WINDOWS\System32\smss.exe C:\WINDOWS\system32...

Post Posted: June 29th, 2007, 5:45 pm

Thank you for your reply, but can you explain me how can this be done?

You see I try doing this, but I ended up on Domain "A", and "B" was nowhere to be found

Post Posted: June 29th, 2007, 5:29 pm

hello everyone.
I was wondering, is it posible to make a computer part of 2 different domain at the same time?

example

I have Domain "A" at home, which my laptop is part of, but my job, require my laptop to be a member of Domain "B"..

Than you

Post Posted: June 28th, 2007, 4:02 am

You guys Rock..... Thank you all for your help... my problem have been solved....

I cant thank you enough :)

Post Posted: June 27th, 2007, 1:06 pm

Ok this is from my Server
Image

And This from my laptop
Image

Post Posted: June 27th, 2007, 12:33 pm

well, I think they are in the same subnet... if they werent wouldnt I lose connectivity to the net?

Could it be something else?

one thing I forgot to mention, even though I can not ping it or log into hte Domain, If I go to My Network Place I can see the Sever 2003 computer is available...

Post Posted: June 24th, 2007, 1:44 pm

Hello everyone... I was hoping you guys could help me out. First off, I dont know much about Domains, as a matter of fact this is my second time I ever delt with installing a Domain Controller. Anyways I have set up a Domain Controller name Mainframe.com at home, using Windows 2003, I have add a use...

Post Posted: June 15th, 2007, 7:06 pm

Thank you guys for your help, I was able to remove those viruses using the software found in here http://spywaredlls.prevx.com/RRHGIF33416010/CBXUSRP.DLL.html Thanks Bogey and Alkatroz here is the new log Logfile of Trend Micro HijackThis v2.0.0 (BETA) Scan saved at 10:01:53 PM, on 6/15/2007 Platfor...

Post Posted: June 12th, 2007, 6:45 pm

Could any of you guys help me with this?... I have my computer so full of pop-ups that is killing me Thanks Logfile of Trend Micro HijackThis v2.0.0 (BETA) Scan saved at 9:26:29 PM, on 6/12/2007 Platform: Windows XP SP2 (WinNT 5.01.2600) Boot mode: Normal Running processes: C:\WINDOWS\System32\smss....

Post Posted: May 28th, 2007, 12:02 pm

Thanks guys

Im back in business thanks to u guys.

Post Posted: May 26th, 2007, 10:39 am

I recently Unistall Ubuntu Linux store on my sencond computer's hard drive, Know that this computer has on the 1st hard drive XP media Center. Ever since I remove this Linux, everytime I start my PC, I get the following error GRUB Loading stage1.5. GRUB loading, please wait... Error 22 can any of yo...

Post Posted: May 19th, 2007, 7:50 am

Hello everyone Its it possible to setup a Wireless Router, in a way in which only computer that are part of certain Domain can access the wireless network? If so can any of you guys let me know how this is done? I have a Netgear WPN824 v2 Wireless router and Im using Windows Server 2003 Enterprize D...

Post Posted: May 12th, 2007, 7:58 am

Hey guys, how are you all doing. Recently I install OpenSuse 10.2 using VMware Workstation (similar to Microsoft Virtual PC), when I installed, I was able to use the internet in it, however after I installed the Vmware tools on this OS, I restarted and I lost internet connection, I have not been abl...

Post Posted: May 8th, 2007, 1:32 pm

I have solve the problem.

I solved using the Windows XP recovery Console and replacing the edited boot.ini file.

Post Posted: May 8th, 2007, 3:33 am

Hello everyone. I have a problem trying to start up windows, I'll try to explain what happen, and see if you guys can help me out. Ok so about two days ago I bought a new hard drive so that I could upgrade my system to 2 hard drive, and to format the hard drive I inserted a Windows Server 2003 cd, I...

Post Posted: February 17th, 2007, 6:57 am

Well the monitor is brand new.
I tested two monitors, and still had the same result
(both monitors are fine, because they work in other PCs

Post Posted: February 17th, 2007, 6:38 am

Hello everyone. I recently bought computer parts, to biuld my own costum PC. So far I have connected everything, they way its suppose to, and when I press the power button, everything turns on, however, the monitor does not give me any image. At first though it was a video card problem, but I tested...

Post Posted: February 16th, 2007, 6:43 pm

Thank you Dangles

Post Posted: February 15th, 2007, 6:37 pm

Hello Everyone.
I was wondering what was best to keep your Porcessor cooler, Thermal Compound or Thermal pads?

Thank you

Post Posted: December 30th, 2006, 11:22 pm

Thank You Anarchy for your Review, Im not going to even lose my time in downloading it

Post Posted: December 25th, 2006, 7:20 am

thanks Anarchy

Post Posted: December 24th, 2006, 3:04 pm

Hello guys
Can any of you guys tell me your opinion about Linux XP OS?

thank you

Post Posted: December 23rd, 2006, 8:21 am

Thanks guys for the help. I forgot to mention before that I had a PCMCIA card, and thanks to Anarchy's help, I have found out that the WPN511 Netgear cards are compatible with Linux OpenSuse. However I have failed to find a tutorial that helps me install this card. anyways you guys can give me a han...

Post Posted: December 18th, 2006, 4:19 am

Ok, so I try what that article told me to do, but had no luck. Now my next move would be to buy a wireless adapter that is comptible with Linux OpenSuse 10.2. Would any of you guys know were I can find one?
I would prefer if the wireless adapter is a PCMCIA

thank you all

Post Posted: December 16th, 2006, 6:15 pm

Thanks for your help dyefade, I'll look at it.
and let you guys know if I have another question

Post Posted: December 16th, 2006, 4:53 pm

Well apperently its support it by linux, because it reads a wireless antenna
(Broadcom Corporation BCM4318[Airforce One 54g] 802.11g Wireless Lan Controller(eth1)) <-- that is the name of the wireless antenna tells me it has.

Post Posted: December 16th, 2006, 3:15 pm

Hello everyone Every time I try to connect wirelessly using my laptop to my router (Netgear RangeMax 108 wireless router) with linux OpenSuse 10.2, the progress bar goes all the way to 28% complete and the progress bar doesnt go anywhere pass this point. However all my Windows XP laptops connects ju...

Post Posted: July 23rd, 2006, 6:59 am

hey guys its been a while since the last time I posted. hope you are ok Anyways I have a problem with my pc and I was hoping you guys could help me. the problem is that everytime I try to connect to the net using a dial up moderm my computer will shut down. before I use the DSL it was working fine, ...

Post Posted: March 27th, 2006, 5:12 am

thanks guys

Post Posted: March 27th, 2006, 5:07 am

Thanks SandMan.
But is there anyways to find out how many I have left out of those 180 days the the CD originally gives me?

thanks again

Post Posted: March 23rd, 2006, 5:09 pm

Thanks guys... I have an additional question, how do I know which is the right PSU for my Computer? Do any of the fans start up or even try to spin, do any lights on the motherboard light up even with the psu off? no, no lights, except for a small green light in the exterior right by the PSU fan, th...

Post Posted: March 23rd, 2006, 5:03 pm

Is there anyways to find out how long do I have until I reach my expiration date in a Windows XP evaluation copy?


Thank you all

Good day

Post Posted: March 15th, 2006, 5:15 pm

Hello everyone, I hope you all ok. Anyways one of my PCs suddently stop functioning, it will not turn on at all.. every time I disconnect the PC from the power and plug it back it will make a noise kind like a small whistle( like the sound that a camera with flash makes when you take the picture and...

Post Posted: February 19th, 2006, 3:09 pm

Quote:
In parctice though MAC addresses can be spoofed by altering the registries.

wow you must be really good at reading minds, rofl, I was about to ask a question about that.... thanks geegel.

Thank you ATNO for your reply

Post Posted: February 18th, 2006, 9:16 am

thank you all for your help

Post Posted: February 18th, 2006, 9:15 am

Is there anyways I can find out what my MAC address is? if so how can I do this?

thank you all, hope you all have a nice day

Post Posted: February 12th, 2006, 4:13 pm

Taffytime, I check your log and everything seems fine except for this process

O16 - DPF: {1D9EFA3B-4E85-41A8-9092-14012CD447C9} (NetCamPlayerWeb Control) - http://192.168.1.106/img/NetCamPlayerWeb.ocx

Im not sure about this process

Post Posted: February 7th, 2006, 3:05 pm

I have a quick question... Maybe you guys can help me with this.

Does the amount of user's accounts on a single computer affects the speed of the computer?

thank you.

Post Posted: February 5th, 2006, 2:17 pm

post a hijackthis log, and we may be able to help you get rid of the virus itself.

Post Posted: February 5th, 2006, 2:16 pm

awesome job, that template looks awesome

Post Posted: February 4th, 2006, 1:13 pm

ohh that is a relief, thank you Tom for your help.

Post Posted: February 4th, 2006, 7:45 am

Is there any hidden folder on windows tha has the windows key store in it?
if so, can you guys please tell me how to get there?

Post Posted: February 1st, 2006, 5:26 am

You mean the BIOS beep codes from the POST test? No, its not the BIOS beep, from what Dell make me understand, was that they know when they have a memory problem, by having the Caps Lock light flash about 5-7 times and then the computer will shut off. Plus the blue screens and error messeges that I...

Post Posted: January 31st, 2006, 6:23 pm

oh my god!, that was sick... jejeje good one Tom

Post Posted: January 31st, 2006, 1:07 pm

A new Hero has appear in the horizon, what hopes can this new hero bring us? :lol: :lol:

http://www.ebaumsworld.com/videos/laserfart.html

Post Posted: January 31st, 2006, 12:02 pm

I run a Dell Diagnostic tool, that checks all hardware. and the memory was the faulty one... Plus the laptop was giving a signal everytime I press the power button, that supposedly means bad memory... at least that was what the Dell support chick told me. I'll run the test using that software anyway...

Post Posted: January 31st, 2006, 11:26 am

Hey grinchh .. thanks... after calling Dell Support, I find out what the problem was... apperantly I have bad memory(not me, the laptop lol :lol: ) So I have arrange for a tech guy to come and replace my mother board... thanks for your help guys.. Lets just hope my problems are over after this. Than...

Post Posted: January 31st, 2006, 9:04 am

Have you checked the System Event Log in Control Panel -> Administrative Tools -> Event Viewer -> System? I check into that place you told me and this are the 2 errors I found, that got repeated over and over again. http://img55.imageshack.us/img55/9339/error20ml.th.jpg...

Post Posted: January 30th, 2006, 12:37 pm

Hey guys my laptop keep giving me errors and the blue screen of death. I havent been able to get the BSD error code. However I manage to take a screenshot of an error code, maybe you guys can help me Identify what my problem is... thank you here is screenshot I http://img378.imageshack.u...

Post Posted: January 29th, 2006, 11:58 am

ok.. I have image the files and install linux. That Suse looks really nice. Only problem is that I cant find the Linksys wireless usb adapter driver that supports Suse anywhere and my sound card doesnt seem to be supported by suse either... but that is not big deal I can live with that... other than...

Post Posted: January 27th, 2006, 1:40 pm

thank you for your answer Panda_Man.... I have an addicional question can this be done with RecordNow Plus?...

again thank you

Post Posted: January 27th, 2006, 7:23 am

Hey guys, thank you for everything, I have decided to try Suse 10.1 beta 2 ( at least thats what I think is call..lol) Now I have downloaded the ISO file... and I have copied to a disk... but it doesnt seem to work... Is there something Im missing? Am I suppose to do something else with that ISO fil...

Post Posted: January 25th, 2006, 5:20 am

alright... thanks for your advice Anarchy..

Post Posted: January 25th, 2006, 5:13 am

Im not trying to remove the computer from the domain... Like I said before, I want to have one user name caable of accesing the domain, while Im at school and another user name capable of accesing my Workgroup while Im at home...

Please forgive me if Im confusing you.

Post Posted: January 24th, 2006, 7:28 pm

hello grinch, thank you for your reply.... I did what you asked me to do, and here is the result.... http://img74.imageshack.us/img74/7473/workgroup6rw.th.jpg I still cant connect to the workgroup without having to delete all the accounts. Any suggestions? thank you

Post Posted: January 24th, 2006, 12:01 pm

Thank you for the reply. Daemonguy, my intentions with Linux is for "home-grown apps and/or internet driven services" as you said and to learn a little bit more about the Linux OS, who knows maybe someday I may include it in my resume :wink: .... so what would be your advice, which distro ...

Post Posted: January 24th, 2006, 9:59 am

Hello ozzu members... I was wondering if any of you guys could tell me which is the best(in your opinion) linux operation system out there, in terms of hardware and software compability and network/server friendly( I dont know if Im making any sense in this last one). Also if you could be kind enoug...

Post Posted: January 23rd, 2006, 7:59 am

Avast, no dought about.

Post Posted: January 21st, 2006, 10:38 pm

Avast Home Edition

http://www.avast.com/

Post Posted: January 20th, 2006, 11:46 pm

if I use my normal username and password for the school domain it will not let me in local machine. The only way for me to have access to it is by creating a new user.

any suggestion

Post Posted: January 20th, 2006, 4:10 pm

Sorry to heard that......my condolences

Post Posted: January 20th, 2006, 2:13 pm

I tried doing it, but everytime I create the new user (with admin rights) and try to change that user from the domain to a workgroup, a window will pop up, saying please type domain user name and password to deleted domain account... and I do, and as soon as I do it, it will deleted all my accounts ...

Post Posted: January 20th, 2006, 5:38 am

How long ago did you start using the internet on a regular basis? Well, its hard to remember, but ever since 2001 I have been using the PC dialy. Im PC addict. lol.... Do you still study/practice? Yeah, Im currently assiting to American Intercontinental University now.... And is something that is a...

Post Posted: January 18th, 2006, 10:31 am

Thank you grinch

Post Posted: January 18th, 2006, 10:25 am

Everyday I feel like I losing more and more english/Spanish words on my vocabulary.... I can seem to find any words at all when Im trying to speak or write....I feel that my english was 10 times better 2 years ago than what it is today... so Im asking is it just my imagination or Im really forgettin...

Post Posted: January 18th, 2006, 10:19 am

Dont do drugs...lol :)
Anyways congrats.... Try to enjoy as much as you can in the University. Thoise are the best years that someone can have, later on you have nothing else to do but work ...and work ...and work ...and work.........
Study hard

Post Posted: January 18th, 2006, 10:16 am

You shouldnt feel bad.... How old are you? I mean you probably have your mind so full of worries. This is normal... and yes you should be honest no matter how much the truth hurts...

Post Posted: January 18th, 2006, 5:16 am

I was wondering if it was possible to have a single computer, with to different account (or usernames, which ever you prefer) would be part of different networks?

Example User1 be part of MSHOME workgroup and User2 be part of UFL domain.... get the Idea?

can this be done?

Post Posted: January 18th, 2006, 5:13 am

Power Archiever is a good one. This software inst free, but it lets you used for free.... if you dont pay for it, you will have to deal with the software poping a few seconds delay efore you can use it.

http://www.powerarchiver.com/

Post Posted: January 17th, 2006, 10:17 am

Thank you Nucleo for the story and Axe for the Suggestion... Now I know that I must stay away from belkins. I wanted to swish my Linksys Wireless Router for a Belkins, good thing you said that, Now I will love my Linksys for ever and ever lol.... Is there any Linksys Wireless router outthere that ca...

Post Posted: January 17th, 2006, 5:22 am

Quote:
stay very far away from belkin

Please, explain why?

Post Posted: January 15th, 2006, 8:58 pm

I'll have him in my prayers Typhon... but there is no better cure, than the will to live.

Post Posted: January 15th, 2006, 8:00 pm

DSL is permanet connection, you dont need to dial any numbers to get into the net. As soona s your PC starts you already are in the net

Post Posted: January 15th, 2006, 2:02 pm

In your Device Manager go to the Action Tab and click on the option that saids
"Scan for Hardware Changes". Hopefully that will find all your devices.

when did all this start happening? and how did it begun?

Also make sure all your hardware is properly connected.

Post Posted: January 15th, 2006, 1:57 pm

Please Download Hijackthis and run it, then post the log here.

here is the link to download it.

http://www.download.com/HijackThis/3000 ... ag=lst-0-1

Post Posted: January 13th, 2006, 9:09 am

This are some nice speakers

http://www.tigerdirect.com/applications ... =3&Recs=10

Post Posted: January 13th, 2006, 8:10 am

your log looks clean....however Im not sure about this process

O17 - HKLM\System\CCS\Services\Tcpip\..\{C7C9812E-6C89-48A8-A618-01D9AE1501B9}: NameServer = 202.133.64.3 202.133.64.20

its best if you wait for another more experience member to reply.

Post Posted: January 13th, 2006, 8:03 am

Here are a few softwares that you can download. Hope it helps Spybot Search and Destroy is a great anti-Spyware software: http://www.download.com/Spybot-Search-Destroy/3000-8022_4-10401314.html?tag=lst-0-1 For Antivirus you can always choose Avast, not only is it free, its really good as well. If yo...

Post Posted: January 12th, 2006, 3:59 pm

not bad

Post Posted: January 12th, 2006, 3:57 pm

no there is no risk.... is only a bunch of processes thats all, no personal info is displayed.

Post Posted: January 12th, 2006, 12:13 pm

Your log is clean....

Post Posted: January 12th, 2006, 10:03 am

My pleasure 8) ... I have you are able to find what you are looking for where you live.

Post Posted: January 12th, 2006, 9:50 am

Well I have experience with Pentium IV desktops, but not laptops, and so far I like Pentium IV performance. I dont think they should be much difference in a laptop. As for Pentium M, that is what my laptop has, and it works great. I dont have any complains about it....

Post Posted: January 12th, 2006, 8:51 am

Go with Toshiba... Dell Sucks....
I have a Dell Laptop and all it has done is give me headaches ever since I got it....

Post Posted: January 12th, 2006, 8:04 am

Quote:
Chuck is almost as cool as ninjas


rofl... did you read the Facts lines?
here is the first Fact
Quote:
Facts:



1. Ninjas are mammals.



dougggg lol

Post Posted: January 11th, 2006, 1:56 pm

ohh I know what that is... Those are remaining parts of the Death Star... rofl.... :lol:

cool picture, I wish I would have been the one taking that picture.

Post Posted: January 11th, 2006, 7:46 am

I dont know much about this, but could this be cause by any malware?
can you try to post a hijackthis log? just in case. :oops:

Post Posted: January 11th, 2006, 6:53 am

jschultz wrote:
you keep your desks so clean.... mine at work is terrible unless the big wigs come into town then it gets spotless...


lol, Im the same way here....My PC at work...well lets just say I dont clean as much as I do home.... :lol:

Post Posted: January 11th, 2006, 6:46 am

How much will this computer cost?... hope is not half million... like the lamborghini :shock:

Post Posted: January 11th, 2006, 6:43 am

In order for them to see each other, you have to have them in the same workgroup. You can do this by going to control panel, Click on "System" and them select "Computer Name" tab. There should be a buttom that says "Change". Click on it and just choose whatever name you...

Post Posted: January 11th, 2006, 6:25 am

Sorry, but I wouldnt know how to help you out on this one. :cry: I apologize. Please wait for someone else with more knowledge.

Post Posted: January 10th, 2006, 8:57 pm

Ace Utilities and/or TuneUp Utilities 2006.

These 2 do more than just registry cleaning

Post Posted: January 10th, 2006, 12:44 pm

Quote:
wut does that have to do with installing a game

A firewall can prevent any software in their "naughty list" from starting, that include games.

Post Posted: January 10th, 2006, 12:19 pm

Run HijackThis and fix the following. C:\PROGRA~1\Toolbar\TBPS.exe C:\PROGRA~1\Toolbar\PIB.exe C:\PROGRA~1\Toolbar\TBPSSvc.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://www.websearch.com/ie.aspx?tb_id=50245 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,SearchAssis...

Post Posted: January 10th, 2006, 5:19 am

your welcome.
Quote:
by all accounts it should be connecting properly.

Does this means your are trouble free now? 8)

Post Posted: January 9th, 2006, 6:28 am

I believe is a Latitude D610

Post Posted: January 9th, 2006, 5:47 am

Well I do have a Sony. However I want to do this BIOS downgrade in a DELL laptop.

Post Posted: January 9th, 2006, 5:30 am

My old computer doesn't have any wireless hardwares. How can I network them together via my DLink router? forgive me if I missunderstood the question, but as long as you have a USB connection in the Old PC, you can always buy a USB Wireless Adapter. here is a few from D-Link http://www.tigerdirect....

Post Posted: January 9th, 2006, 5:24 am

First of all welcome to this forum Ammodude. Now, you may have already done this be make sure that your computers are all in the same WorkGroup. Whatever name you choose for your workgroup, should be the same for every computer you have... I finally got both laptops to connect to the network, but wh...

Post Posted: January 5th, 2006, 8:52 pm

Thank you Pramitroy

Post Posted: January 5th, 2006, 6:31 pm

That laptop need to be clean up... run HJT and check the following.... close all windows escept for HJT and and press the fix button [code]C:\Program Files\winupdates\winupdates.exe C:\Program Files\ISTsvc\istsvc.exe C:\Program Files\Internet Optimizer\optimize.exe Check with an antiviru...

Post Posted: January 5th, 2006, 6:44 am

really touchy article, that shows how dangerous is to drive while drunk. not only do you put your life at risk, but the life of others.

God bless Jacquiline for her bravery.

Post Posted: January 3rd, 2006, 10:32 pm

Is there anyway to do an update roll back in BIOS?

thank you

Post Posted: December 26th, 2005, 1:45 pm

The problem many not be in your Wireless network, It could be your Graphics card...

Does this happen when you are playing online? do you have the same effects playing single player (not online)?

Post Posted: December 25th, 2005, 5:02 pm

Well Fuzz at least you got some pens, all I got in this day was a really nasty cold... :evil: talk about luck.

Post Posted: December 22nd, 2005, 5:22 am

what is live messenger?

Post Posted: December 22nd, 2005, 5:20 am

You can also reset your router to factory default, and start all over again, of course I would use that as a last resort thing.

Post Posted: December 22nd, 2005, 5:15 am

ImmortalDuck, I dont think Lan Connections is located at the network connections. Open internet Explorer--> Tools ---> Internet Options---> Connections---> Lan Settings. I believe that is where it should be. As for changing the IP, if you buy a router, this pretty much takes care of it.....

Post Posted: December 21st, 2005, 8:02 am

unfuna wrote: When you start you computer, enter bios and change the boot order to start with the cd in first. he already try that.... But the second suggestion will do fine here is a link if you need to download it http://www.23cc.com/free-fdisk/ you can also use kill disk http://www.download.com/A...

Post Posted: December 19th, 2005, 5:19 am

Gracias Labrego,

Post Posted: December 18th, 2005, 10:55 am

Could it be your graphics card going bad?.... it could be a posibilty....

Post Posted: December 17th, 2005, 10:43 pm

what a horrible death... he was so young...
My sympathies :(

Post Posted: December 17th, 2005, 10:41 pm

ohh thanks Grinch

Post Posted: December 17th, 2005, 4:47 pm

Is it possible to password protect a certain folder across a network(workgroup)?
if so... how can this be done?

Post Posted: December 17th, 2005, 2:59 pm

thanks pramitroy

Post Posted: December 17th, 2005, 2:17 pm

Yes, today is a really special day, because 6 years ago in a day like today, I was reborn, This day 6 years ago I was able to escape from my country, in search of freedom, hope and a better future. It was today 6 years ago when I became a proud cuban-american...... Thank You USA, for all the oportun...

Post Posted: December 17th, 2005, 2:09 pm

lol good point :lol:

Post Posted: December 17th, 2005, 10:43 am

Thanks Pramitroy... I will deleted this immediatly.... thanks a lot, I hope this is the spyware that is causing the problems... and that as soon as I finish I can play games without lag... Again thank you... you are the MAN! PS--> Is this View Point a Spyware? I though there was a MEdia Player ca...

Post Posted: December 16th, 2005, 10:35 am

I need you guys help... can you guys please scan this log for me a see if you find anything else than just the ViewPoint Toolbar( is this a malware?)....Im having some problems when it comes to play games, Im experiencing a lot of lag...I suspect that I have some sort of malware.... thank you guys L...

Post Posted: December 16th, 2005, 6:18 am

is this for real? man.... that must be so painfull,

Post Posted: December 16th, 2005, 5:24 am

OMG! somebody end that guy's misery :lol: , I bet the guy sitting in the side was about to jump off that catapult if he had scream once more.

Post Posted: December 12th, 2005, 3:17 pm

Here is an updated version of the one I posted some time ago:

Attachments:
picture25kg.jpg


Attachments:
picture41dd.jpg


Attachments:
picture52uh.jpg


hope you like it

Post Posted: December 9th, 2005, 7:49 am

you can also use adobe After Effects,or Adobe Premier, I have seem a lot of edited videos using this software and is so cool.... for example, I saw a video of this guy, that using a broom stick, he made it look like one of those laser swords of Star Wars, it was amazing....

Post Posted: December 7th, 2005, 8:25 am

sorry fir the noob question... but why do the network cables overheat?

Post Posted: December 7th, 2005, 7:49 am

He is behind a router and almost all routers out there today close the ports anyway so a software firewall is not needed at all Sorry, but I desagree, :oops: I have a router with a build in firewall, and I stiill get a lot of attacks block by my software Firewall. Besides, it never hurt to have a s...

Post Posted: December 6th, 2005, 5:26 am

Install and Run the HijackThis. and then post the log here in the forum, that way we can see whether you have spywares or not.

here is the link
http://www.download.com/HijackThis/3000-8022_4-10379544.html?tag=lst-0-1

Post Posted: December 5th, 2005, 12:11 pm

Quote:
Last Known Good Configuration

This is done by pressing F8 while booting the PC.. and choosing it in the boot menu..right? :oops:

thank you Grinch...

Post Posted: December 5th, 2005, 10:08 am

anyone :( ?

Post Posted: December 4th, 2005, 9:42 pm

alright, thanks pramitroy, hopefully this will be helpfull to brandom, lets hope he reply soon.

Post Posted: December 4th, 2005, 9:18 pm

yeah you are right... how might he fix this? by loging in as an admin? how about the proxy?.. never have really understand much about the proxies

Post Posted: December 4th, 2005, 9:16 pm

I have a friend using a laptop....(XP home) She was installing HP Photosmart E317 digital camera, after she did, she restarted and then her laptop just stops responding at the logon screen, she can move her mouse, but nothing appears in her screen...I told her to go to safe mode but it would do the ...

Post Posted: December 4th, 2005, 9:11 pm

I dont think it have much difference, except that it devides the updates into different settions... of course windows update has it (hardware updates, High priorities) but Microsoft Updates has Office Updates included...but the reason for which I tell him to do this, is because downloading this migh...

Post Posted: December 4th, 2005, 5:44 pm

Linksys rulesssssss... lol I was about to post you some screenshots of what I meant, but you hit the jackpot
by the way which linksys router you bought? which firmware version does it have?

Post Posted: December 4th, 2005, 5:28 pm

yes, all windows xp SP2 have the ability to auto update, you just have to apply the settings. You can download the Microsoft Updater from their site, this should fix any conflits that he might be having... anyways here is the link to the Microsoft Update software: http://update.microsoft.com/microso...

Post Posted: December 4th, 2005, 5:21 pm

Liltman, you should not turn off the firewall, that will make it easier for hacker/intruders to have access to your PC, intead, add your network's IP ( or IP range) to the Firewall's trusted zone, to allow only those two computers to have access to the net.

which firewall are you using?

Post Posted: December 3rd, 2005, 9:35 am

if XP go to microsoft.com, and down load "Microsoft Update"... Windows update is old school now :)

Post Posted: December 2nd, 2005, 3:56 pm

thank you so much pramitroy.... finally I got rid off the messenger....

Post Posted: December 2nd, 2005, 6:10 am

You should consider installing SP2, this update ts great when it comes to networking, Also if you have a firewall, this may have been your problem all alone, because Firewalls will block your network connections, if it doent have your network's IP range in the trusted zone. try chequing that, also r...

Post Posted: December 2nd, 2005, 5:32 am

I know this is out of the WMP topic, but still in the whole remove thing lol...would you guys know how to remove Windows Messenger?

Post Posted: November 30th, 2005, 10:26 am

glad your problems are over... but this is just a tip.. next time it happens, the easy way to fix this, is by taking a 15 pound hammer and hit the NIC untill you get the right connection... :lol:

Post Posted: November 29th, 2005, 5:47 pm

Quote:
You can look at Walmart...don't you work there?

not anymore... I work for Puradyn Filter Tech now...lol... if you ever need a truck filter just PM me lol
Anyways.. yes I will check around in the stores, and see what they got... Then I'll post it here for opinions

thanks you all

Post Posted: November 29th, 2005, 5:30 pm

Thank you guys, I'll check that before buying it for her...

Post Posted: November 29th, 2005, 4:22 pm

did you just add one IP? or an IP Range? if you have 3 PCs, you should give an IP range of 5 or 4 Ips ex 192.168.1.100 - 192.168.1.104 I leave an extra 1 or 2 IP just in case I may need then later, but its not necesary.. make sure you are putting the right IPs, you can check you IP by going to start...

Post Posted: November 29th, 2005, 7:30 am

are you using zone alarm?Even if is not ZoneAlarm you will have to add an IP range into the trusted zone or else the firewall will not let you share the files... I could give you some screenshots on how to do this, its just that now Im at work, and I dont have firewall in here,(at least not this com...

Post Posted: November 29th, 2005, 6:19 am

I think China is a beautiful country, it has great places, that are really interesting, such as the great wall, etc. To bad its Communist, but at least they have free market, at least Chine have been able to pull their economy up. which is a good thing, not every communist country has it.

Post Posted: November 28th, 2005, 9:20 pm

I have a question guys?
I have a friend who wants to upgrated her memory, but she has a SDRAM PC125 (125 MHz)
.
Is it possible to put a PC100 or PC133 on here PC insted of a PC125?

Post Posted: November 28th, 2005, 7:40 pm

Quote:
And then you'll ask yourself, why did I choose this line of work *lol.

lol :lol: ..... :oops:

so in other words I wont be able to shut down my bro's PC remotly

Thanks for the explanation ATNO.

Post Posted: November 28th, 2005, 7:22 pm

Do you know how to create a domain Grinch? what is the difference between a Domain and a Workgroup? Is it that can hold more people?.... thank you

Post Posted: November 28th, 2005, 3:40 pm

anyone else?

Post Posted: November 28th, 2005, 3:31 pm

Hey grinch, I try doing as you told me but when ever I press OK, it tells me Failed, Access Denied. Any suggestions?

PS--> just in case Im trying to do this through a workgroup. Not a Domain.

Post Posted: November 28th, 2005, 10:22 am

32- Any Sad stories you may have.
33- Are the ozzu members trying to humiliate you? lol

Post Posted: November 28th, 2005, 10:16 am

As for the integrated Video card.. well someone may have another opinion, but I think integrated card sucks big time.... but that is just me...Other than that the PC looks nice.

Post Posted: November 28th, 2005, 10:08 am

I would say, download FDisk and format the drive using FDISK, then use the XP CD to delete the partition that FDISK make and install XP or Linux, which ever you want...

Post Posted: November 28th, 2005, 10:04 am

Liberty or Death!!! ahhh... lol... thats something most communist in my country say....I know that feeling of patriotism.. it feels nice.

Post Posted: November 28th, 2005, 9:55 am

nice.... SB Im sorry, for all the questions... lol.. I know I can be annoying sometimes... but is just that I like to make sure Im not wasting money in something that I will end up not using it... I hope you understand... lol... thank you... and yes if you have any others suggestions I would me more...

Post Posted: November 28th, 2005, 9:42 am

is the video quality as good as the pictures?

Post Posted: November 28th, 2005, 9:34 am

ohh... thats the only bad thing about it.... cause I need to have cassettes , due to the fact that, the country where Im sending the video recordings, they do not allow to have personal PCs, so they can only see it with VCRs and TVs. Thanks for the suggestion anyways, SB. anyone else have any other ...

Post Posted: November 28th, 2005, 8:08 am

Im great, thank you ;how about you?

ohh this is so cool, thanks a lot for those links pramitroy.... :D
you guys rock 8)

Post Posted: November 28th, 2005, 8:04 am

cool... will this camera save those videos on memory or do you need a cassette to save it?

thanks

Post Posted: November 28th, 2005, 7:51 am

ohh..I see When you were having that trouble I thought you said they were on the same workgroup? yeah they were... but I was having trouble sharing files.. and after it, I could have some access( barely) cause I have to enter a password and I couldnt be Iddle for 5 minutes or my bro's PC would cut m...

Post Posted: November 28th, 2005, 7:28 am

Thank you Grinch, one further question, will I have to do this every time I want to shut down the PC through the network? Thanks.... By the way do you remember all that trouble that I went through with my network; that it would not let me in, and all..... well I reformat both computers... and guess ...

Post Posted: November 28th, 2005, 7:24 am

Thanks SB... However what I need is a DV camera (Digital Video) :oops: :lol:
or did I misunderstand, and what you show me is a video camera?

Again Thank you

Post Posted: November 28th, 2005, 5:24 am

Hey guys I need a suggestion from you all. I a need to buy a digital video camera, that can shoot videos and take pictures as well. When taking picture to have a least 1.3 megapixels. The price should not exceed $300. Also this camera should be able to connect to a PC. I found this: http://www.tiger...

Post Posted: November 28th, 2005, 5:12 am

Hello guys, how are ya all... I have 2 questions. 1. Is there any possible way to shut down a computer, from another computer (these computer share the same network)? 2. I know you can share a printer driver through a network and then be able to use it, now is it possible to share a webcam driver th...

Post Posted: November 27th, 2005, 12:32 pm

Problem Solve!!!! :lol: ..... Do you guys remember when I mention that all this problems started to happen after willma? well the problem was that the telephone line was damage.... Now the reson it worked sometimes and others not, was because sometimes when the win move the cable, I would lose not o...

Post Posted: November 22nd, 2005, 7:47 am

Yeah as soon as I did the roll back, and saw that it kept on doing the same thing I updated the driver the the latest version.... as for the NIC, its an integrated NIC, so I'll have to test it using my bro's computer.... Funny enough all this begun to happen after wilma pay us a visit.... I just hop...

Post Posted: November 21st, 2005, 8:42 pm

I check both thing, the NIC and cable the all pass the self test succesfully... and I even did "a roll back driver" and the problem still come ups....ahhh this is annoying me
:evil: ... help me please.:cry:
thank you..

Post Posted: November 21st, 2005, 12:38 pm

now that i think about it, the other day I updated my NIC driver.... that is probably the cause of my problems, got to check that when I get home.
thank you... :oops: ... I'll let you guys know whenever I get home... :lol:

Post Posted: November 21st, 2005, 10:46 am

get a metal brush and brush, brush and bruch until there is nothing left :twisted:

seriously use a wet cloth and rub that side until is clean...

Post Posted: November 21st, 2005, 10:38 am

yeah I have test it on everyway, I have done the moderm self test and everything comes out ok.... Pramitroy wrote Can you ping localhost and the gateway when this happens? Do the lights on the modem stay on? I have done it during the connection, but not when it goes off. nope.. the the internet ligh...

Post Posted: November 21st, 2005, 7:59 am

I have a DSL that keeps turning off the internet at random times, I have already call bellsouth tech support various time asking for help, but this guys all they do is tell me to clear my cache and cookies, and tell me that this will fix my problem ( yeah right). I have clear my cache and cookies, G...

Post Posted: November 20th, 2005, 12:32 pm

thank you guys, your help is most appreciated.... thank you very much :D

Post Posted: November 18th, 2005, 7:23 am

which of this video cards do you guys think is better when it comes to video quality and great graphics? if none of this are good cards please show me one that has the qualities that I mention before... also what should I be looking for when it comes to buy a new video card. first choice: http://www...

Post Posted: November 17th, 2005, 10:15 am

I used to have the same problem, only difference was that I have a Linksys router, I fixed the problem by taking the check mark off from the Internet Filtering option. Now like I said this is from a Linksys router options, I dont know if this may apply to your router. Good Luck.

Post Posted: November 15th, 2005, 8:57 am

thank you grinch... I can now get into my brother's computer, even though I have to put my user name and password to get into the share folders... would you happen to know a way to make Windows remember the user name and password so next time I have access to the network I wont have to type it? caus...

Post Posted: November 12th, 2005, 10:48 am

Hi Grinch, I try what you said but it didnt work, however in the same place instead of going to User Rights Assignment, I went to Security option and turn off "Accounts: Limit local account use of blank password to console logon only", after I disable it it let me go through. Even though I had to ty...

Post Posted: November 11th, 2005, 7:48 am

happy birthday katana, here is my b-day card

http://gusanito.com/g/gusanito/showCard ... rdRID=2856

hope you like it.. lol :oops:

Post Posted: November 10th, 2005, 12:15 pm

poor people.... this terrorist never seem to have enough.. what a bunch of ***holes...
Im glad your bro is ok.

Post Posted: November 9th, 2005, 5:06 pm

thank you very much for your help

Post Posted: November 6th, 2005, 5:40 pm

thank you guys

Post Posted: November 6th, 2005, 5:40 pm

I have my power back TODAY!!! yay!!!! :lol: :D me happy.... :lol: ...

Post Posted: November 4th, 2005, 8:01 am

lol, I knew you would like it, jeje

Post Posted: November 4th, 2005, 8:00 am

welcome back Ms-Bee, Ihope that everything goes great as it is right now for you from now on..
Congrats in the little baby you had
  • Sort by
 
 

© 1998-2017. Ozzu® is a registered trademark of Unmelted, LLC.