Search found 371 matches

Actual Results

Post Posted: December 3rd, 2016, 2:43 pm

Anyone have any ideas

Post Posted: November 21st, 2016, 2:33 pm

Below is a sample alexa ranking xml file: [code] <?xml version="1.0" encoding="UTF-8"?> <!-- Need more Alexa data? Find our APIs here: https://aws.amazon.com/alexa/ --> -<ALEXA IDN="bbc.co.uk/" AID="=" HOME="0&qu...

Post Posted: November 19th, 2016, 10:10 am

If I use the following url:

[url]
https://www.ozzu.com/ucp.php?mode=login ... erlist.php
[/url]

everything is OK

Any explanations

Post Posted: November 19th, 2016, 10:06 am

if you click on url you will see it

Post Posted: November 19th, 2016, 10:06 am

rechecked url and it was:

[url]
https://secure.ozzu.com/ucp.php?mode=lo ... erlist.php
[/url]

Post Posted: November 17th, 2016, 2:25 pm

This is the URL I have been using for years:

[url]
https://www.ozzu.com/ucp.php?mode=login ... erlist.php
[/url]

Post Posted: November 16th, 2016, 9:43 am

When I access OZZU with IE I get the following message: The security certificate presented by this website has expired or is not yet valid. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server. We recommend that you close this webpage and do ...

Post Posted: November 15th, 2016, 9:27 pm

Thanks for your response. What I have gathered then is as follows: eval() evaluates the string given as PHP code and so is a method of running PHP code. We just treat anything you feed to eval as if it was a normal PHP script that just so happens to have a <?php opening tag magically applied to i...

Post Posted: November 13th, 2016, 12:38 pm

I have the following php script to decode some base64 encoded text shown below:
Code: [ Select ]
<?php //Below is the base64 encoded text $en64 = "ZWNobyAiVGhpcyBpcyBiYXNlNjQgZW5jb2RlZCB0ZXh0Ijs="; eval("?>".base64_decode($en64)); ?>
When I run the script the eval() re...

Post Posted: November 8th, 2016, 1:40 pm

By accident I came across a site that had the same problem They indicated it was magic_quotes which existed in older php and was going to be removed and so to turn it off in your php.ini If you do not have access to php.ini you can use the following php code to check and turn it off at start up. [co...

Post Posted: November 8th, 2016, 11:43 am

Hi Bigwebmaster Got it working Seems I can use either htmlspecialchars or htmlentities I ran into another situation. I have the following $str: echo 'This is <br /> test for <br /> break and <b>bold</b><br />'; echo 'the break'; die(); If I use: echo htmlentities($str),...

Post Posted: November 6th, 2016, 8:12 pm

I am getting familiar with base64 encoding and have the following questions. First, I want to encode the following php script line: echo "this is <br /><br/>$en64<br />now"; I let $en64 = 'echo "this is <br /><br/>$en64<br />now";' I then encod...

Post Posted: October 21st, 2016, 7:06 am

I used the following in the htaccess file RewriteCond %{HTTP_HOST} ^mydomain.com$ RewriteRule ^$ http://www.mydomain.com/index.php?template=mytemplate [L,R=301] RewriteCond %{HTTP_HOST} ^www.mydomain.com$ RewriteRule ^$ http://www.mydomain.com/index.php?template=mytemplate [L,R=301] This way I cover...

Post Posted: October 19th, 2016, 12:30 pm

I am having troubling accessing my website: http://www.mydomain.com However, if I use the following url, I can access. http://www.mydomain.com/index.php?template=mytemplate So whenever someone puts http://www.mydomain.com in browser I want to redirect to the url mentioned I was told to put the follo...

Post Posted: June 12th, 2016, 8:52 am

The IP below is an IPv6 site

http://[2001:41d0:2:381::14]/

If you have IPv6 browser and click on link, it will take you to the IPv6 sit

Post Posted: June 10th, 2016, 5:08 pm

I added my IPv4 address mapped to IPv6 to my DNS records When I did a DNS record check it actually showed my mapped IPv6 as an AAAA record for IPv6. I even used my browser, worked only with Chrome, to connect to website using url http://[::ffff:628b:b495]/ and it worked. However, my website indicate...

Post Posted: June 4th, 2016, 10:29 am

Here is my situation so far. I have the following ipv6 address: 2001:41d0:2:381::14 In my browser I put in the url: http://[2001:41d0:2:381::14]/ I am able to connect to the website. Now I try to connect from my website using fsockopen [code] <?php $domaine = "[2001:41d0:2:38...

Post Posted: May 15th, 2016, 8:25 pm

Is there not anybody out there who has some understanding of IPv6 address?

Post Posted: May 13th, 2016, 8:27 pm

This ipv6 is really starting to baffle me. Someone told me connection depends more on your browser not your PHP configuration I used my browser to access http://[2001:41d0:2:381::14]/ and it worked. I then tried with fsockopen() and got Network Unreachable There has to be something I am missing? Any...

Post Posted: May 7th, 2016, 4:53 pm

Hopefully this is a simple array question which I am having trouble with. I have a number of arrays that were created by someone else. The array is $result[$i] The arrays are created and stored. $i can vary from 0 to whatever number. I know the value of $i whenever these arrays are created. as an ex...

Post Posted: May 7th, 2016, 11:03 am

As a test, I ran the local host in ipv6: [::1] This worked with fsockopen() Then I decided to try an ipv4 from yahoo.com and mapped to ipv6: 98.139.180.149 ===> [::ffff:628b:b495] This worked with fsockopen Just for the hell of it use [::] and it worked with fsockeopen Finally ran phpinfo() it ip...

Post Posted: May 6th, 2016, 8:55 pm

I have the following ipv6 address: 2001:4998:58:c02::a9 Now using the command prompt in my windows 8 I ping it and get: Microsoft Windows [Version 6.3.9600] (c) 2013 Microsoft Corporation. All rights reserved. C:\WINDOWS\system32>ping 2001:4998:58:c02::a9 Pinging 2001:4998:58:c02::a9 with 32 byte...

Post Posted: May 2nd, 2016, 9:34 am

I am trying to get the IPv6 address of a hostname. As an example: $IPv6 = 2001:4998:c:a06::2:4008 or Expanded = 2001:4998:000c:0a06:0000:0000:0002:4008 I first get the hostname by $hostname = gethostbyname("2001:4998:c:a06::2:4008") ---> ir1.fp.vip.gq1.yahoo.com or $hostname = gethostby...

Post Posted: April 29th, 2016, 4:09 pm

One of our Ozzu members gave me the following which worked quite nice

Code: [ Select ]
/(\:)+/

Post Posted: April 29th, 2016, 11:39 am

Hopefully a simple question. I need to detect if a colon (:) is in a string I need to use the negative as there must be no colon in order to do something: If(!preg_match("/(:)+/",$strdomaine) { //If no colon found do something } else { //colon found } I have tried various regex versions bu...

Post Posted: April 26th, 2016, 11:42 am

I create an output file called $output which is a number of text lines with line breaks These lines are created on a webpage for which I then use cURL to get the contents which are the text lines with line breaks. I then create an array as follows: $arrayoutput = explode("\n", $output); Th...

Post Posted: April 22nd, 2016, 12:32 pm

I have seen blacklists just for domains When using IPs you take the reverse IP with the blacklist server. With Domains you do not reverse the domain but parse it directly with the blacklist server. Since I am using only one script, when I check a domain, I reverse it before it goes to my function. M...

Post Posted: April 20th, 2016, 10:17 pm

Hi All I developed a PHP script that checks to see if a Domain/IP Address is on any of the Blacklists. When I check a Domain, I find the associated IP Address and then do the test. For an IP address, the test is done directly. I have a problem, I think, when the domain name does not resolve to an IP...

Post Posted: April 5th, 2016, 1:37 pm

After looking at your code, hunting the web and talking to a few people, we came up with the following script that seems to do the trick [code] <?php $urle = "http://sub1.sub2.sub3.sub4.henry.co.uk"; //$urle = "http://sub1.sub2.sub3.sub4&...

Post Posted: April 4th, 2016, 1:31 pm

Something strange here.

If I have http://www.henry.com
When I parse I get henry.com

If I have http://www.henry.co.uk
When I parse I get co.uk, not henry.co.uk

I do not know if I screwed up something.

Post Posted: April 4th, 2016, 11:40 am

Hi Bigwebmaster I got a strange one here. If I use the following code you suggested with only domain name, not full URL, I lose first letter of domain name. [code] <?php $urle ="henry.com"; function parse_tld($urle, $name_only = FALSE) { $info = parse_url('http://' . ltrim($...

Post Posted: March 26th, 2016, 11:11 pm

I am hoping someone can give me some ideas on pinging using php rather than at cmd prompt. I want to be able to ping any IP address, whether it is a website, server or computer terminal. I would like to see the results like when you use the cmd, that is packets sent, received, time, etc. I would lik...

Post Posted: March 24th, 2016, 10:06 pm

By luck I managed to find the syntax: \s* to account for any white spaces. For domain name I used: pattern="^\s*([a-zA-Z0-9]([a-zA-Z0-9\-]{0,61}[a-zA-Z0-9])?\.)+[a-zA-Z]{2,6}\s*$" For IP Address I used (IPV4): pattern="((^\s*|\.)((25[0-5])|(2[0-4]\d)|(1\d\d)|([1-9]?\d))){4}\s*$" ...

Post Posted: March 24th, 2016, 9:27 pm

Hi All I have a form that can give information on a domain name (not subdomains) and on IP addresses. When the user enters the domain name or IP address into the appropriate form input box, I validate it to see if it is of the correct format. For domain name I use: pattern="^([a-zA-Z0-9]([a-zA-...

Post Posted: March 19th, 2016, 10:57 pm

I hope someone can help me here. I have a form where you enter an item and when you post it, it gives you some data. I only want to give someone a maximum of 3 times that they can make a post and then the form dies. If the input is not entered then I prevent the form from being posted, even if submi...

Post Posted: February 7th, 2016, 6:38 pm

I am doing some work on my website where I monitor visitors via their internet address. From this I can get the geolocation information. I have some questions when it comes to the IP address and associated hostname. I know that knowing the IP address you can find the hostname as follows: $hostname =...

Post Posted: January 29th, 2016, 2:01 pm

I want to get domain name from the full URL without tld, cctld, gtld, www, subdomain. e.g. if I am having URL like: http://www.example.com or http://example.com or http://subdomain.example.com or http://subdomain1.subdomain2.subdomain3.example.com or http://www.example.com.au What I want back is: ex...

Post Posted: January 21st, 2016, 12:49 pm

Found the problem
When I entered the longitude, I had put in a space after the latitude comma,
was lat, lon
Should be lat,lon

Everything now works fine

Post Posted: January 21st, 2016, 1:01 am

I am using the google maps to determine elevation from latitude and longitude co-ordinates. I can use the following URL with no problem (lat and long at end of url) http://maps.googleapis.com/maps/api/elevation/json?sensor=false&locations=43.9394, -79.4349 I get the following when open json data...

Post Posted: August 10th, 2015, 5:36 pm

First, I accessed website with link you showed with no problem

Yes, I know but I must go to properties.
Normally I just right click and go to Rename.
Rename is not working.
That is the problem.

Post Posted: August 7th, 2015, 8:04 pm

It changes to the modified name.

Post Posted: July 26th, 2015, 4:53 pm

For some strange reason lately when I try to rename a folder or a file when using windows explorer, I cannot do it. Nothing happens.

If I go to properties of file or folder I can rename it.

This has happened only lately and I cannot figure why.

Can anybody help here

Thanks

Post Posted: January 10th, 2015, 8:24 am

I am starting to get emails again, even ones that I did not get before.

What was the problem

thanks for fixing it

Post Posted: December 29th, 2014, 9:37 am

RECEIVED IT OK

Post Posted: December 24th, 2014, 12:54 pm

would appreciate some response as I a not get any emails what so ever

Post Posted: December 4th, 2014, 8:52 pm

Yes

At bottom of these postings I see:

"Unsubscribe topic"

which tells me I am subscribed?

Post Posted: December 2nd, 2014, 10:04 pm

Forgot to mention did not receive an email for this post.

Post Posted: December 2nd, 2014, 10:04 pm

How about not receiving emails when there is a response to my post.

For some reason I am not getting it so I do not know if anyone responds

Post Posted: November 30th, 2014, 10:02 pm

I tried to send a private message but it has been stuck in my outbox for a few days.
Please help.

Also I do not seem to be get emails when someone answers my posts

Post Posted: November 25th, 2014, 1:12 pm

I have a little question for. I have a form on a php webpage where you input some data and then prints out the results on the same page when you submit (post). The form can be used many times to get different results based on the input data. I noticed in the browser history that every time I use the...

Post Posted: August 19th, 2014, 8:37 am

According to my system information it states that I have OS of 8.1

Post Posted: July 22nd, 2014, 10:01 am

how would I blur the sliders and video player

Post Posted: July 21st, 2014, 2:27 pm

Could you please elaborate on blur causing unforeseen glitches.
I am not familiar with blur

Post Posted: July 21st, 2014, 9:52 am

Tried out your changes and have a few comments. When the video is first loaded: If I use the Up and Down arrow, I can see the volume bar change and the % value also change If I use the left and right arrow, I can see the seek bar change but not the % or video frame until I release the key. If I clic...

Post Posted: July 21st, 2014, 8:10 am

Do you mean adding an event listener for the keys

Post Posted: July 20th, 2014, 9:01 am

I would really like to use the arrow keys to control the video seek bar.

Is this possible?

I would really appreciate some suggestions.

Post Posted: July 11th, 2014, 9:57 am

Is it possible to use left and right arrow keys on keyboard to control seek bar and volume bar I assume you would have to click on the bar in question and then use the arrow keys. I clicked on the seek bar and then used the arrow keys and it worked. I was able to move seek bar left and right and vid...

Post Posted: July 11th, 2014, 8:47 am

I found the problem

Error was so stupid that I can't mention it to keep face

Post Posted: July 11th, 2014, 8:25 am

Gave wrong description for seek bar
I cannot move the seek bar whether the video is playing or not.
I can only click on the bar to move it

Post Posted: July 11th, 2014, 8:14 am

Hi Scott Thanks for the test code. It helped me figure things out. A couple of things I noticed in my code. If the video is not playing I can click on either the seek bar or the volume bar and slide it along. If the video is playing, then when I click on the seek bar or volume bar, they pause but I ...

Post Posted: July 10th, 2014, 10:49 am

Hi Scott I cannot get it to work Either I do not understand still or your script is a little different that what I use. As I stated, if I use my external Play/Pause button, and press Play, my external button changes to pause image, as does the play button on the video controls. I want the opposite t...

Post Posted: July 10th, 2014, 3:59 am

Forgot to give you my button codes: [code] <button id="play" onclick="vidplay()"><img src='/images/play1.gif' width='32'/></button> <button id="mute" onclick="vidmute()"><img src="/images/unmuted.gif" width='32'/>...

Post Posted: July 9th, 2014, 5:35 pm

Hit Scott Got another question. On my player I use an external Play/Pause Button that changes button image depending on situation. For example, if the Play image is shown and you press it, the video starts to play and the button image changes to the Pause Image and vice versa. At the same time I pre...

Post Posted: July 9th, 2014, 11:19 am

Worked like a charm

thanks

Post Posted: July 9th, 2014, 10:20 am

Hi Scott I liked how you put the percentage on the volume slider I would like to add % to my seek-bar video frame slider. The following is my code; [code] <head> <script> window.onload = function() { var myVideo = document.getElementById("mdabdvid"); // Sliders var seek...

Post Posted: July 9th, 2014, 8:33 am

The only one that worked was 1)

I am curious why this happened

thanks for your help

Post Posted: July 8th, 2014, 11:55 pm

I have run into a little situation with your volume controls As I had mentioned before I also have an external video seek bar. I use the window.onload in the <head> section to load the functions. For your function you use <body onload="dom_load()"> After everything is loaded, y...

Post Posted: July 8th, 2014, 8:48 pm

I must say when you put your mind on something you don't fool around

Great Work!!

Post Posted: July 8th, 2014, 8:10 am

Worked perfectly

thanks

Post Posted: July 7th, 2014, 7:40 pm

Let me go over what I have now. My browser is IE 11. The video player: [code] <video id="mdabdvid" width="520" controls> <source src="myVideo.mp4" type="video/mp4"> <source src="myVideo.webm" type="video/webm"> <...

Post Posted: July 7th, 2014, 3:04 pm

What I wanted was to get rid of the alert function and to always display the movie duration. After hours of looking on the internet I finally came up with a solution that not only gives the move duration but also the current time of the movie as follows for anyone interested: [code] //Get Duration a...

Post Posted: July 6th, 2014, 2:58 am

Thanks for your reply Nightslyr But you need to remember that although you may be good at javascript, there are a lot of newbies, including me, that are just learing, so it is not always trivial. After a lot of searching I finally figured out how to do it. It also involved using the innerHTML featur...

Post Posted: July 5th, 2014, 1:01 pm

I figured out how to automatically display the html5 video duration on web page load as follows: [code] var myVideo = document.getElementById("mdabdvid"); myVideo.addEventListener("loadedmetadata", function() { dur = (Math.round(myVideo.duration*100)/100) + "...

Post Posted: July 5th, 2014, 9:50 am

I have a question I hope you can help me with. I have created an HTML5 Video Player. One of the things I need is the video duration time. At the moment this is how I do it. [code] <button onclick="getDuration()">Video Length</button> function getDuration() { var s = document...

Post Posted: June 4th, 2014, 5:33 pm

Actually, I have 8.1

Post Posted: May 30th, 2014, 10:59 pm

Just when I thought I finally had things going, something else happens.

All my apps had been working fine.

Now when I open any app, it opens and then minimizes to the task bar.
No matter what I do, I cannot get it to maximize and use it.

Any one have any idea why this is happening

Post Posted: May 23rd, 2014, 5:21 pm

I finally got the store and all other apps etc. working. Now another problem occurred. Every time I tried to download an app, it started and then stopped and then I get all those stupid errors again. Again, thanks to win8.1, it appeared I was not the only one having these problems. I tried WSreset.e...

Post Posted: May 23rd, 2014, 2:01 pm

I forgot to mention that after you run noproxy.reg and everything is ok, that you should reboot your computer

Post Posted: May 23rd, 2014, 12:22 pm

After hours of searching and trying I finally came up with a way to finally disable the proxy server. This was done changing the following dwords in the windows registry from value 1 to 0 and removing the address: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] "...

Post Posted: May 17th, 2014, 6:57 pm

After some intensive investigating, I believe I found what is causing the problem. A lot of people seem to have the same problem which looks like it did happen after I upgraded to 8.1 It appears to be the Proxy Settings in my IE 11 I went to Internet Options-->Connections-->LAN settings The Pr...

Post Posted: May 16th, 2014, 8:30 pm

Hi All I got a new computer with Windows 8 I later went to the windows store to upgrade to 8.1 Lately I noticed that I cannot connect to the windows store. I am not sure if upgrading to 8.1 was the reason. I have tried the following with no success: Follow the steps to clear the store cache: 1.Press...

Post Posted: May 16th, 2014, 8:11 am

Hi grinch2171 I started putting all programs on D: as you mentioned. It worked for most of the time. However, there were a few instances when I installed on D: that the program did not function properly. They did ask me where to install and I said D When I uninstalled and reinstalled on C, they work...

Post Posted: May 11th, 2014, 10:28 pm

I found a partition tool called "MiniTool Partition Wizard" This tool can apparently extend one partition by taking from another partition on the same disk. What I am thinking to do is to take 650 GB from D: and give it to C: This would mean then C: would be about 800 GB and D: would be ab...

Post Posted: May 11th, 2014, 4:59 pm

Is it possible to combine C and D so that it just becomes C at 1TB.

I am new at this so I would need some simple instructions to follow

Thanks

Post Posted: May 9th, 2014, 8:25 am

The software was preloaded.
When I turned on the computer for the first time, it automatically went into installing Windows 8.

So what happens then when C: becomes nearly full while D: is empty.
Will windows 8 start to use D: when necessary

Post Posted: May 8th, 2014, 8:22 pm

My old computer died and so I ended up buying a new one. The new computer has windows 8 with a 1 TB SATA3 disk drive. When I went to File Explorer to check out the computer, I saw something which was strange to me. First, I must say that this was the first time I had a computer with 1 TB hard disk. ...

Post Posted: May 7th, 2014, 1:37 pm

Thank you so much

That was exactly what I needed

You the man

Post Posted: May 7th, 2014, 8:54 am

Hi all I hope someone can give me some advice with my problem. My old computer had winXP. I had purchased the above HP all in one printer and got an installation disk to install on winXP. Everything worked great. Unfortunately, my computer died, so I had to get a new one. The new computer had Win 8 ...

Post Posted: April 25th, 2014, 6:33 am

I decided to go back and check the product directory again. I finally noticed that they had an .htaccess file from the old hosting company which was redirecting to them as Bigwebmaster suspected. Once I removed the .htaccess everything started to work fine. Thanks for your response I will also keep ...

Post Posted: April 13th, 2014, 7:58 pm

I have never used both websites together. I removed all the .htaccess files but still got problem. I even moved the folder containing the downloades from my subdomain to the root of my new hosting and still got same problem. I even tried renaming web pages and this did not help. This is really baffl...

Post Posted: April 13th, 2014, 9:44 am

I have a strange situation that I hope someone can help me with. I have two hosting accounts. On one of the accounts I had two websites. I was not happy with this account so I decided to cancel it. Before I cancelled, I had setup subdomains on my other accounts and transfered all the folders there. ...

Post Posted: November 21st, 2013, 11:54 am

The problem is that I have so much information on my site and use many extensions that cannot be used on higher version upgrade. I checked and a lot of the extension people have not upgraded for the higher version of Joomala Many of my information on my site depends on these extensions. If I simply ...

Post Posted: November 21st, 2013, 8:58 am

As I had mentioned before, because I use a template, I cannot just simply replace my home page. I did as you suggested but it only worked when the page gets initially loaded. If you click on any links they cause the same promblem I actually loaded my home page without a template and all the box menu...

Post Posted: November 20th, 2013, 9:34 pm

Mr OBrien Thanks for the response. I am not sure what you mean by "off your home page". Using Google Chrome I went to my website and did a view source and I saw what you were indicating. The problem is my site uses a template and when I check the template I do not see anything as indicated...

Post Posted: November 16th, 2013, 3:26 pm

Whenever I access my website I get two unwanted links with images showing up in russian. It appears I have been hacked. I used this program called Fiddler which showed the two links going to a russion website ads.nic.ru. I found the IP address and found that it was part of the CIDR given by 31.177.9...

Post Posted: October 20th, 2013, 10:13 am

what I mean is that it looks like someone printed an article and put it on my front page. I tried finding the source of this article but could not find it. It looks russian and all that appears are small square little boxex. Here is the other thread http://forum.joomla.org/viewtopic....

Post Posted: October 19th, 2013, 9:51 am

The problem is that I have some unauthorized content on my front page. I cannot seem to get rid of it. I did go to the Joomla forum and did everything they asked me to and still could not get rid of this content. Then they started getting too technical and started to confuse the heck out of me which...

Post Posted: October 19th, 2013, 9:46 am

I do not have a load tester. Anything else I could do

I used the MemTester program to run about 4 passes on my RAM and it showed everything passed.

I am just a home computer user and not a computer tech so there is only so much technical stuff I can do

Post Posted: October 18th, 2013, 7:00 am

Hi

Is anyone running a Joomla 1.5.26 CMS site.

I am having a little security problem.

The reason I still have this site is because, if I upgrade to latest Joomla, many of my extensions will no longer work and there are none to replace them.

Thanks

Post Posted: October 17th, 2013, 4:53 pm

As I had indicated I installed new hard disk and it had nothing on it yet still gave me the same problem when I tried to install some software.

Post Posted: October 16th, 2013, 9:43 am

I actually did install new hard drive but I still got the same problems.

This is why I do not think it is the hard drive.

Post Posted: September 6th, 2013, 4:13 pm

This computer is really starting to drive me bonkers. I replaced the CMOS battery, shorted the CMOS reset pin, replaced the CD drive and replaced the SATA cable. The computer had 4 SATA control positions and I tried each one. When the computer works, it works good but then freezes. The light on the ...

Post Posted: September 3rd, 2013, 5:48 pm

I opened up the computer and managed to find the CMOS battery. I measured the voltage and found it to be 2.3V down from 3V so I bought a new one. Before I installed the new battery, I shorted out the CMOS Reset pin to reset all CMOS settings. I put the battery in and then closed the computer, powere...

Post Posted: August 27th, 2013, 11:57 am

With respect to the CMOS battery.

I assume it is OK to just take it out
Will anything get screwed up if I take the battery out.
Is there a time limit on how long th CMOS battery can be removed.

I just do not want to corrupt anything and make matters worse

Please advise

Post Posted: August 27th, 2013, 7:28 am

How can it be the cables.

I never opened the computer until it started to act up
Then I only changed position of cable to other SATA port.

Is there a bootable CD that I can use to test the motherboard
How does one go about testing a motherboard

Post Posted: August 26th, 2013, 6:11 pm

Hi ScottG Ubuntu is just a Linux system. On my computer, I used to have Windows Vista. One day, it just would not boot anymore. I contacted Dell, had vostro 220s, and they sent me disks to reinstall the softwware. No matter how many times I tried to reinstall windows it would always hang up at the p...

Post Posted: August 24th, 2013, 10:05 pm

Would appreciate a response from any one.
I really need to get my computer up and going

Post Posted: August 16th, 2013, 10:43 am

Hello I have a strange situation that I hope someone can help me with. I installed ubuntu 13.04 OS on my hard drive with no other OS but this linux one. It installed with no problem. I updated software, restarted and everything was fine. I used the computer for hours with no problems. When I finishe...

Post Posted: August 16th, 2013, 9:15 am

I installed the ubuntu 13.04 with no problems. I was able to update and restart with no problems. However, when I turned off the computer and turned it on the next day, it would not boot. When I checked the files on the hard drive with the gparted live CD, I saw that there was no file system or part...

Post Posted: August 3rd, 2013, 11:52 pm

I finally figured out you have to make a bootable ISO before the computer will boot it. Found a nice freebie called imageburn that does it quite nicely. My original hard drive was Seagate Baracuda 250GB Since this was no longer made, I had to buy the 500GB version. I do not know for sure right now, ...

Post Posted: August 3rd, 2013, 1:38 pm

I managed to find a CDRecovery program.
On another computer, I copied all the files on the vista oem dvd to the hard drive.
I then burned all the files to a DVD

When I tried to boot off the new DVD, it was not bootable.

Is there something else I need to do

Post Posted: August 3rd, 2013, 10:04 am

How do I clean a scratached DVD
What would I need to make a copy.
If it is scratched will not that prevent copying of file

Post Posted: August 2nd, 2013, 11:16 pm

Yes

Maybe I scratched it

Post Posted: August 2nd, 2013, 5:48 pm

The problem is the install fails and so vista is not installed so I have no OS to work with

Post Posted: August 2nd, 2013, 5:37 pm

Sorry but that is not possible

Post Posted: August 2nd, 2013, 5:25 pm

Not now.

After I install I use WIFI to connect to my internet

Post Posted: August 2nd, 2013, 5:13 pm

After two attempts to re-install I get the same error message: "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007045D This is very strange as I am useing the vista install boot CD and so all the f...

Post Posted: August 2nd, 2013, 4:45 pm

It copied the files
Then goes to expand stage and is stuck here

Post Posted: August 2nd, 2013, 4:00 pm

I took out the hard drive and went to buy a new one showing the original old one. The original was 250GB but they only made now 500GB and since it was only $55, I bought it. I installed it, partitioned it and formatted to NTFS. I then put in the vista install CD, got to the point where I select the ...

Post Posted: August 2nd, 2013, 8:43 am

I turned the computer off then on again the next morning.
I got a disk read error.

Could this mean the hard disk is faulty or what?

Post Posted: August 1st, 2013, 8:43 pm

I have updated 21 drivers and firmware and the 136 microsoft updates. Dell tells me it could be my hard drive. They won't do anything because out of warranty. I checked memmory with the memtest86 for over 12 hours and it passed. I tested the hard drive and all the tests I did showed it to be in good...

Post Posted: July 31st, 2013, 4:06 pm

I got the disks from Dell and re-installed the Windows Vista. Now I have a different problem. When vista works it works pretty good. However, after a few minutes of operation, it freezes and I have to wait until it unfreezes. This sequence is constantly happening. If I try to install any programs, t...

Post Posted: July 26th, 2013, 12:44 pm

I called Dell and I must say I was pleasantly surprised. I was told I would be sent CDs for the OS and drives for free as a one time only deal. Hopefully when I get them next week, I might be able to use them to try some repair. If not, I will re-install vista os. Is it true to say that when I re-in...

Post Posted: July 25th, 2013, 11:44 pm

I tried the ubuntu usb and was quite pleased the way it worked. The computer is connected to the internet via my WIFI using a USB stick. Once I put in the password, I was able to connect to the internet. This was very important to me. I tried to looked up my hard disk. I went to Files->Computer-&...

Post Posted: July 25th, 2013, 9:00 pm

I will call Dell when they are open. I have never had much luck with Dell Support so I have a few questions just in case: From the testing tools I downloaded, it looks like the hard disk is definitely in good heath. The problem appears to be that it has an unknown file system and so the vista os can...

Post Posted: July 25th, 2013, 5:59 pm

I decided to download th Ubantu Desktop OS to see if I could install it along side my windows vista. When I came to the final install point, there was a message that indicated that there was no other OS system installed and that if I installed Ubantu, it would erase all files on the drive. I quit th...

Post Posted: July 25th, 2013, 11:44 am

Yes I ran virus scan, chkdsk /f /r and it worked for a while. Then I started getting error loading operating system. It looks like partition and mbr info is corrupted and computer cannot access vista os. My hard drive appears OK but no bootable program I use can access vista os on the drive as menti...

Post Posted: July 25th, 2013, 11:41 am

As I have been mentioning, no program that I have used so far can detect vista os so that I can repair it. Boot-repair-cd did detect that I had vista in hard drive but it could not load it as it says says boot sector type unknown and unknown filesystem type so it could not mount it. It is starting t...

Post Posted: July 25th, 2013, 7:58 am

Yes, that was the boot-repair-cd. When I loaded it, it did not show two options. The Recommended Fix option was not displayed, only the Create a bootinfo summary. I believe this again is due to it not be able to detect the OS. What is funny though is that when I look at the log text file, it does sa...

Post Posted: July 25th, 2013, 7:48 am

As I had mentioned before, I tried using bootrec but it did not work. When I click repair computer a System Recovery Options window appeared but it did not show my vista operating system. This means I cannot select an OS to fix. As I mentioned before, when I tested the hard disk the following inform...

Post Posted: July 24th, 2013, 6:44 pm

From what I can see, in order to use the factory image I need to be able to boot into advanced options, F8

At the moment I cannot do this as I can only get into F2 or F12 which are just setup and boot menus

Post Posted: July 24th, 2013, 6:33 pm

What is meant by factory image and how do I ask for it

Post Posted: July 24th, 2013, 6:32 pm

I found a bootable program called Boot-Repair-Disk It did find my Hard Disk and that Vista was installed. When I looked at the hard disk information I saw the following: Partition Table: Unrecognized Partition: unallocated File System: unallocated Do you know what this means. Is my hard disk really ...

Post Posted: July 24th, 2013, 4:41 pm

I removed the watch battery for a couple of minutes and then put it back but it had no affect. I did manage to find a windows vista recovery disk that was bootable. I put it into my CD drive and it started to load window files, showed the moving green bars and then displayed Install windows asking f...

Post Posted: July 23rd, 2013, 7:42 pm

With respect to the Dell recovery Image, I cannot boot to advanced options, that is F8 does not work only F2 and F12 so I cannot try this

Post Posted: July 23rd, 2013, 7:38 pm

I will try your suggestion to remove CMOS Battery

Can you give me an idea in what area to look for the battery and what it looks like as I have never done this before

I always thought that without CMOS battery you could have trouble starting computer even after you put it back

Post Posted: July 23rd, 2013, 6:00 pm

67LV4J1

Post Posted: July 23rd, 2013, 5:47 pm

I ended up putting a number for service tag which it accepted.

I went through the list of downloads but did not really find anything about recovery and repair

Post Posted: July 23rd, 2013, 5:28 pm

My computer is a few years old and so cannot give a service tag or am I missing something here

Post Posted: July 23rd, 2013, 5:27 pm

My computer is a few years old and so cannot give a service tag or am I missing something here

Post Posted: July 23rd, 2013, 4:34 pm

It was bought from Dell with everything preinstalled

Post Posted: July 23rd, 2013, 4:17 pm

I was able to get to CMOS setup using F2 and under Boot Configuration, I did see the Model of the Hard Disk Drive so it is definitely seen by the computer.

Using F12 I was able to get ot boot menu.
I saw the Hard Disk and tried to boot with it but got Eroor loading operating system

Post Posted: July 23rd, 2013, 3:56 pm

I ran bootrec.exe /fixmbr and it said completed successfully. Also ran bootrec.exe /scanos and it did not find any windows instatllation. Also tried bootrec.exe / rebuildbcd and it found no windows installation Also ran bootrec.exe /fixboot and it said element not found. I tried to reboot again norm...

Post Posted: July 23rd, 2013, 10:45 am

Things are getting strange now. When I reboot I get the following message: "CD-ROM ROM Priority...No Medium" "Error Loading Operating System" For some reason it cannot see the hard disk. As stated before I tested the hard disk and it seems to work so why can it not be seen. As a ...

Post Posted: July 22nd, 2013, 11:51 pm

After a while, I was not always able to boot in safe mode. Since the computer was OEM with no OS disks, I searched the net for a vista bootable recovery console which I found. I used this to try and repair. It had indicated bad MBR and so said it repaired it. When I tried to boot normally, I got err...

Post Posted: July 20th, 2013, 6:33 pm

I have a Dell Vostro computer with windows vista. When not in use I turn it off. Lately, it is behaving a little strange. When I turn the power own, it starts to boot, but sometimes hangs up when the moving green lines appear, sometimes befor this lines and other times after the line. When I restart...

Post Posted: July 19th, 2013, 9:23 am

I had actually done a chkdsk right after I got the error message.

It had no effect, problem still exists.
Either it reboots after some time or eles I get the numerous small display windows indicating it cannot set register address

Any other suggestions?

Post Posted: July 18th, 2013, 7:17 am

I unchecked box and eventually got blue screen with following: Kernel_Data_Inpage_error Technical info: STOP: Ox0000007A (0xE1E1FB48, 0xC000009A, 0xBF8AA8D2, 0x0907F86C) WIN32.sys - Address BF8AA8D2 base at BF800000 DateStamp 51ad4593 I then went to event viewer but was not sure which event to look ...

Post Posted: July 17th, 2013, 7:46 pm

Are you saying then to just unCheck and leave dropdown at none

Post Posted: July 17th, 2013, 11:23 am

For "Write Debugging Information" dropdown list, it is now set to none. Should I select "Small Memory Dump(64 KB)" or what after I uncheck "Automatically restart"

Post Posted: July 16th, 2013, 7:47 pm

My computer would work for a few hours. Then all of a sudden numerous small windows would appear stating"Could not set registry address". I would click on OK in the window but all that happened was more windows appeared. I would have to physically turn the computer off then on again to get...

Post Posted: July 15th, 2013, 8:27 pm

Does anyone know how to unFUBAR my registry

Post Posted: July 15th, 2013, 5:19 pm

After surfing the net I found a winxp recovery console that I used to fix a few things. My computer now does not reboot but instead starts showing numerous windows that say "Can not set register address". When this happens I cannot use my computer. Anybody have any ideas why this could be ...

Post Posted: July 3rd, 2013, 2:46 pm

I cannot recall other than there were some trojans. I could not find Windows logs in Administrative tools I had bought the computer from MDG with the OS installed. I had to reinstall once before and had problems with authorization numbers on computer which did not seem to agree for activation. Spent...

Post Posted: July 3rd, 2013, 7:47 am

Ran Malwarebytes a few times and it did find some viruses which were cleaned. It had also corrupted my sound system so that I had to reinstall it. I then recreated pagefile. I appear now to have a different problem. After a couple of hours, the system freezes and I have to reboot it by cycling power...

Post Posted: June 27th, 2013, 12:13 pm

No I have not

Will try it and get back to you

Thanks

Post Posted: June 27th, 2013, 11:09 am

I also tried System Restore but I always get message "Cannot Restore checkpoint" no matter which one I select

Post Posted: June 27th, 2013, 8:11 am

Hi All My computer has windows XP home edition. Recently, some strange behaviour is occuring. If I use my computer all appears OK. If I let my computer sit idle for a couple of hours or more, it appears to reboot and I get the Message "Recovered from serious system error. The following is an ex...

Post Posted: December 22nd, 2012, 10:21 pm

I figured if I dug enough, I would eventually find a general consensus on how to determine when the letter Y was a vowel or a consonant. Fortunately for me, it agreed with the rules I plan to use. The following is what I found: If a syllable begins with Y, and the next letter represents a vowel, the...

Post Posted: December 22nd, 2012, 2:44 pm

I ran your new script and based on new rules in my previous post the following needs changing: kay: y stated as vowel but should be consonant may: y stated as vowel but should be consonant kuykendahl: y stated as vowel but should be consonant murray: y stated as vowel but should be consonant I inves...

Post Posted: December 22nd, 2012, 2:34 pm

Hey ScottG After going over everything carefully, I had been wrong in a few areas. After hours of investigating, I believe the following is probably the most correct for the letter y. 1. words with "oy" the letter y is a vowel e.g. boy, joy, toy, roy 2. words with ay, ey and uy the letter ...

Post Posted: December 22nd, 2012, 12:33 am

hey scottG

In my rush to set down some rules, I may have mixed things up a bit.

When you have a working script, please advise and then I will test carefully what you have.

Thanks

Post Posted: December 21st, 2012, 11:12 pm

The more I dig into this, the more differing opinions I get, even why I contacted some english teaches. To try an narrow this done I have come up with 2 things that I was given that I will use as a basis for testing. Rule 1 If you replace the letter y with the sound /j/ and the word sounds almost th...

Post Posted: December 21st, 2012, 8:11 pm

I tried the word boy as another check which should have been a vowel but it was stated as a consonant.

Post Posted: December 21st, 2012, 7:59 pm

Hi ScottG Got a response from Germany that snuck into our post Moderator should have a look at this. Anyways, I downloaded you file and was able to open it and test it out. It gave the letter y in some cases as a vowel when it should have been a consonant. I used the following to test for y being a ...

Post Posted: December 21st, 2012, 12:54 pm

ScottG

Downloaded test.zip but get error when try to open
Error: central directory not found

Post Posted: December 20th, 2012, 1:40 pm

Here is what I have been able to do so far: [code] <?php echo "<br />"; $firstname = "BARBARA"; $middlename = "ANN"; $lastname = "KELLY"; echo "Name : ".$firstname." ".$middlename." ".$lastname; ec...

Post Posted: December 20th, 2012, 12:49 pm

Hi All If a name or word contains the letter y, I need to determine if it is a vowel or a consonant. Here is what I grammatically know, assuming I am correct. It may sound a bit winded so sorry about that. The letter y is a consonant when it is the first letter of a syllable that has more than one l...

Post Posted: December 18th, 2012, 10:52 pm

Hi All I have a blog at http://websiteprotection.blogspot.ca/ As I was surfing the net I came across another blog with URL http://websiteprotection.blogspot.hk/ When I went to the blog, it was identical to mine. The main difference was that it had some links in Chinese to other websites. I was reall...

Post Posted: December 11th, 2012, 2:45 pm

Hey, you are right

I went back and redid the code again.

I must have somehow got your first version and second version screwed up when I did the changes.

Works perfectly without middle name.

Thanks and sorry

Post Posted: December 11th, 2012, 6:26 am

Hi ScottG I have been testing using firstname, middlename and lastname and it works perfectly. I just noticed that if I use only firstname and lastname, no middlename, I get the following warning: Warning: key() expects parameter 1 to be array, null given in /home/... Looks like you must put in a mi...

Post Posted: December 10th, 2012, 1:33 pm

Again, great stuff

You gave me what I wanted and read my mind.

Being able to get the value of each letter was actually something I was also thinking about.

Thanks for your great help.

Post Posted: December 10th, 2012, 11:30 am

Hi ScottG Great Work! If I use echo $table2[0]['total'] I get Total of 11 which is good How would I also show the letters in the row The key seems dependant on the letters of the first, middle and lastname which I would not know for the other rows What I would like then is to be able to get the foll...

Post Posted: December 9th, 2012, 1:43 am

I do not think using a database would help. The data is strictly dependant on the person's name which is going to change all the time so putting it in a database will do nothing but take up room. The rows will be completely different when the name changes. I do not want to store any information. Als...

Post Posted: December 8th, 2012, 8:11 pm

Hi All I am working on a project and need some help to get to completion. I have an array that assigns a number to each letter of the alphabet. Let us say we have the name "Thomas John Hancock" First I need to get the letter number for the firstname, middle name and last name. I do this as...

Post Posted: December 6th, 2012, 5:30 pm

Hi Spork

Your typos acually did me a favour.
Like they say, you learn more by your mistakes.

If you hadn't given me the first step to work on, I would not have come up with the solution.

Thanks for your help

Post Posted: December 2nd, 2012, 2:01 am

I managed to figure it out. There was another error in the function which I changed: From:if (in_array($vowels, $name[$i])) To: if (in_array($name[$i], $vowels)) I was getting array errors, because the second parameter was not an array. Now things work. The following is the final code I got to work;...

Post Posted: December 2nd, 2012, 1:39 am

My problem is not setting up a form but getting the name to the function For example:
Code: [ Select ]
$input = "joseph"; $firstvowel = first_vowel($input); echo $firstvowel;
When I try the above, I keep getting errors about array This is my problem, do not know how to incorporate input into...

Post Posted: December 1st, 2012, 10:04 pm

I have a form on a page

The user enters his name and then submits it.

I want to transfer the submitted name to the function and echo it

Post Posted: December 1st, 2012, 12:25 pm

Hi spork

Found samll error in code

changed:
from: $i = 0,
to: $i = 0;

Functions always give me a bit of trouble.

I am having trouble putting in a name and echoing the output.
Could you change your code so that I can enter a name variable and then echo the output vowel.

thanks

Post Posted: December 1st, 2012, 11:37 am

Hi again I modified your code as follows and now it takes care of the exceptions: [code] <?php function NumbersAsSum($myNumber) { if(!is_numeric($myNumber)) //optional, can filter some bad code { die("The input seems to contain some nasty (or unsupported) stuff, Script halted"); } while...

Post Posted: December 1st, 2012, 11:24 am

Hey WritingBadCode

Your code works create.

I do have a few exceptions where if the length is greater than 1 but the sum is 11, 22 or 33, then it should stop and not reduce it further but echo only 11, 22 or 33

Could you add this exception to your code

thanks

Post Posted: November 29th, 2012, 11:30 pm

Hi All I can't seem to be able to create a php script that will find the first vowel in a name. Take as example, JOSEPH We see the first vowel is O I want the script to check each letter of the name and when it finds the first vowel, to stop and echo it. Sounds simple but can't seem to do it. Would ...

Post Posted: November 25th, 2012, 11:45 pm

Hi All I am trying to write a PHP script but can't seem to get there. Hopefully someone can help. Here is what I am trying to do. I have a number I want to first get the length of the number If the length of the number is <=1 then I use the number as is. If the length is >=2 then I want to spl...

Post Posted: September 23rd, 2012, 11:18 pm

Hi BWM I do not know how they did it, but I now have access to port 25 outbound. I think all the help you gave me lead to them doing this for me. I do not know for sure, but they might actually have a CSF firewall, but cannot be sure. Again, thanks for all your help. I don't think this would have ha...

Post Posted: September 21st, 2012, 6:12 am

You can see now what I have been going through Based on what I saw for your firewall, I was wondering about the following: Port 587 outbound works fine. Tell them to look at the SECTION:SMTP Settings in their firewall. Since port 587 works then for port 587, they probably have SMTP_BLOCK = "0&q...

Post Posted: September 20th, 2012, 11:06 pm

Hi BWM This is their response: "We have checked it yet again, and port 25 is indeed opened for both inbound and outbound connections. Additionally, we 've checked the firewall, and it does not interfere with port 25 in any way. Thus, if you are still having the problems, we suggest you review y...

Post Posted: September 20th, 2012, 9:49 pm

I asked them about their firewall, direct socket connection and all that and they came back to me with one sentence" "You may get the issue because 25 port is already being listened by mail server. And your socket conflicts" When I saw this I lost it completely. I have it in writing t...

Post Posted: September 20th, 2012, 4:51 pm

Sorry

I saw you were off-line and had to get back to them so I mentioned everything stated above.

Hope this does not cause a problem

Post Posted: September 20th, 2012, 3:35 pm

Hi Yes, they are using CPanel. I will ask them what firewall they are using. Do you think they will tell me and should I mention CSF or leave it to them. I think I am working with someone who can change things, because they did indicate that they did open the port for me and then double checked it w...

Post Posted: September 20th, 2012, 1:20 pm

Hi BWM I am not quite sure I understand the option Should I just copy the above on # SECTION:SMTP Settings I am not sure what they all mean. How could I put it to them in simple words that I would understand and also them, just in case. This sounds like it may be the problem What is so different abo...

Post Posted: September 19th, 2012, 11:08 pm

hey BWM My hosting company insists that port 25 is not being blocked by their firewall. When I try to connect to your mail server I can only connect on port 587 not port 25. Before this drives me crazy, can you give me an possible ideas of what is going on. I am assuming they are telling me the trut...

Post Posted: September 18th, 2012, 8:24 pm

My hosting company got back to me and said they opened up both port 25 and 587. To test them I used the script you gave me to connect to your smtp server using both port 25 and 587 When using port 587, I was able to connect to your server. However, when I used port 25, I was not able to connect. The...

Post Posted: September 15th, 2012, 12:26 pm

What I meant was when I have my website on OZZU hosting then I will link to it

Post Posted: September 14th, 2012, 10:03 pm

Hi BWM Thanks for your reply. Of all the hosting companies I have you are the only one that has been helpful. I am actually thinking of cancelling one webhosting company and coming with you as your prices are reasonable. The websites on that hosting are not doing too good so I want to completely rev...

Post Posted: September 14th, 2012, 12:52 pm

I have tried to speak to my hosting company but I had to do it via email so I do not know when to get an anwser. I have a couple of questions: 1) If I switch hosting to OZZU, will I have the same problem 2) If I do switch, how is this done for my existing websites. I do not have a clue how to do thi...

Post Posted: September 14th, 2012, 7:58 am

I am not sure what to ask my host. If they are blocking outbound port 25, how would I convince them to open it. As mentioned, I really do not want to send emails. All I want to do is to be able to validate an email address. Is it possible for them to block email data but still allow outbound connect...

Post Posted: September 13th, 2012, 7:33 pm

I still do not understand the problem. I do not want to send emails. I only want to try to validate an email address. You indicated previously that with the web source I was using: "That is only for inbound on port 25 though. The test that you are running is from another server that is trying t...

Post Posted: September 13th, 2012, 6:15 am

I modified the script to include the OZZU mail server and put it on both websites.

Each website was not able to connect to your mail server.
Got error 110, Connection Timed Out in both cases.

But this is the problem I have been enquiring about in this thread.
I can connect locally, but not remotely.

Post Posted: September 12th, 2012, 8:27 pm

I used your script and changed it to echo a message back.

On both websites port 25 is open and available.

Actually, I had also used a similar script to check port 25 which was found to be open and available on both websites.

Post Posted: September 12th, 2012, 4:03 pm

When I do use the website resource I mentioned I can communicate with both SMTP servers on both websites and I do get responses back from each server when I connect and then use the standard HELO, MAIL FROM, RCPT TO, RSET and QUIT commands. The servers respond to each command I send. If port 25 were...

Post Posted: September 12th, 2012, 12:16 pm

I have not seen any further responses.

Does this mean I am out of luck

Post Posted: September 8th, 2012, 2:44 pm

checking inbound is basically what I want. I want to be able to verify emails like they do. I have a script that when someone registers on my site, I check for proper syntax and that an MX mail domain exists. As a last test, I want to connect to the smtp server to see if it actually exists. I realiz...

Post Posted: September 7th, 2012, 5:28 pm

I used a script myself to check that port 25 was open on both websites and it was.

A couple of posts back I indicated that the following url

http://www.checktls.com/perl/TestReceiver.pl?FULL

could access both mx hosts on port 25 with no problem.

I do not think port 25 is the problem

Post Posted: September 7th, 2012, 11:32 am

Hi BWM

Both websites are hosted on different hosting account.

First I used my home computer to ping both websites.
I was able to ping one but not the other from my PC

I then went to each website and pinged each website from the other and that was OK. Each website was able to ping the other.

Post Posted: September 5th, 2012, 8:31 pm

Hi Zealous I found a website where you could enter the SMTP host and port number for testing at: [url] http://www.checktls.com/perl/TestReceiver.pl?FULL [/url] I entered my SMTP host names and port 25 and it was able to connect to both hosts on port 25. If they can connect I should somehow also be a...

Post Posted: September 5th, 2012, 11:16 am

The only ports open on both websites is port 25

I have no control over the other ports.

Is there another way, other than fsockeopen to connect to the smtp server.

There must be something as other websites can connect to both of my smtp servers on both websites

Post Posted: September 3rd, 2012, 1:32 pm

Hi Zealous I was able to figure out my script by adding stream timeout and and HTML <br /> break as follows: [code] if ($con) { while (($buffer = fgets($con,4096)) !== false) { //Set stream ouput time so doesn't take forever stream_set_timeout($con, 5); echo $buffer."<br />"...

Post Posted: September 2nd, 2012, 11:00 pm

I have what I hope is a simple question. When I do get to the smtp server, I can get back 1, 2 or 3 220 responses dependent on the server. Right now to get the response I use:
Code: [ Select ]
echo trim(fgets($con));
however, the above only gets the first response. To get all 3 responses I need to get...

Post Posted: September 2nd, 2012, 12:41 pm

I went to a couple of websites that verify email addresses by connecting to the SMTP servers: http://verify-email.org/ http://www.email-unlimited.com/tools/verify-email.aspx http://tools.email-checker.com/ http://my-addr.com/free-email-verification-tool/ve...

Post Posted: September 2nd, 2012, 1:02 am

I put my script on two other separate shared hosting websites. If I use the script on each website to connect to the mail servers for the website, I can connect to both no problem. If I try to connect from one website to the other website's mail server then I always get the 110 Connection timed out ...

Post Posted: September 1st, 2012, 11:09 am

Hi Zealous I don't know if this makes any difference but both websites are on two different shared web hosting sites. No files permissions are needed. On each website both have chmod of 644 Checked port 25 on both websites and they were both open. I have no idea about firewall on server allowing con...

Post Posted: August 31st, 2012, 8:09 pm

Hi All I have the following script on one of my websites that I use to test for responses from the smtp mail server for the website domain: [code] <?php $smtpServer = "mail.smtp.com"; $port = 25; $timeout = 30; //connect to the host and port $smtpConnect = fsockopen($smtpServer,...

Post Posted: August 27th, 2012, 5:26 pm

Hi jobert

It worked

thanks

Post Posted: August 27th, 2012, 12:59 pm

I can't use what you say because the key always changes The key is basically the host smtp mail server the $new is found by gethostbyname($host) to get the IP address which is basically the key value here. I wanted to use a foreach loop to go through the array and find $new since host is always chan...

Post Posted: August 27th, 2012, 12:33 pm

Hope someone can help I have an array called $test It can have one element or many elements If I do a print_r($test) for 3 elements I would get: Array ( [mx1.megamailservers.com] => 0 [mx2.megamailservers.com] => 1 [mx3.megamailservers.com] => 2 ) What I want to do is change the values, 0,1...

Post Posted: August 18th, 2012, 6:55 pm

Hi Zealous

I saw that web page.
Tried fwrite() but still got nothing.

is there any way to put a debug in my script so that it prints out anything it gets

Post Posted: August 18th, 2012, 4:38 pm

Hi All I have the following PHP script: [code] $sock = fsockopen($host, 25, $errno, $errstr, $timeout); if(!sock) { echo "Connection To Mail Server Failed"; exit; } else { echo "You connected to server"; echo"<br />"; fputs($sock, "HELO ".$host&...

Post Posted: August 18th, 2012, 12:58 am

Hi Weldan I got your message and it did help me out. Now I got a funny situation. I use the smtp RCPT TO command to send a valid email address. The mail server comes back with 250 OK I then send an invalid email and the server still says 250 OK I read if the email is invalid that I should have got U...

Post Posted: August 16th, 2012, 5:59 pm

Thanks for your reply weldan

I simply want to talk to the mailserver.

I know this can be done using Telnet.

I want to do it with PHP

Post Posted: August 16th, 2012, 1:42 am

HI all First I must say that I am not sure how PHP and STMP work together so bear with me. I want to check whether an email address exists or not using PHP? and to get information about the owner of the email address? I have read the following: Let us say I have an email address myname@mydomain.com ...

Post Posted: August 10th, 2012, 11:39 am

Hi All Hopefully someone can help. When someone visits my website, they can click on a link that sends them to a web page where they can select articles to view. When the link is clicked, the referrer is also sent which I monitor. When they are on the articles web page they select an article from a ...

Post Posted: July 31st, 2012, 9:06 am

I took your idea and used COLUMN instead as follows:

Code: [ Select ]
=IF(COLUMN()<=$A$1,1,IF(COLUMN()<=$A$1+$B$1,0,2))


Worked great

Thanks

Post Posted: July 31st, 2012, 8:19 am

hi Alk

What I want is in a single row, all 32 colums to fill
I guess I did not quite say it properly
I do not want to go down rows in a single column

Post Posted: July 25th, 2012, 3:39 am

Hi All I am hoping someone can give me some explanations on a situation I have. I will give examples as this is the best way to explain. I take a decimal number, 401, and convert to 8-character Hex which gives me 00000191 I then break down the hex number into 4 groups of 2 and convert them to binary...

Post Posted: July 23rd, 2012, 8:12 am

Hi All Hopefully someone can help me. I have a situation as follows: Row of Cells A1:AF1 (32 cells) I calculate two values such as: A2 = 23 A3 = 9 Both will always add up to 32 What I want to do is the following: 1) Using the value in A2, 23, fill the first 23 cells with digit 1 2) Using the value i...

Post Posted: July 18th, 2012, 5:51 pm

Thanks for the explanation If I understand correctly then: If someone has pressed the submit button, the the value of $_POST['dns'] then exists. We check then if dns value exists. If it exists it is set to whatever value was inputed If it doesn't exist, then it is set to null. Could you please expla...

Post Posted: July 18th, 2012, 4:18 pm

Thanks for repy I do not quite understand your codes:
Code: [ Select ]
$dns = (isset($_POST['dns'])? $_POST['dns']: null); $ip = (isset($_POST['ip'])? $_POST['ip']: null);
what is the ? for. Could you please go through your code for me so I can understand better...

Post Posted: July 11th, 2012, 3:14 pm

I think I understand what you are saying. I made one form with two submit buttons All the caclulations are done for both submit buttons on the same page which is the action attribute. When I enter input 1, input 2 is empty I assume when I click submit1, it sends input 1 and empty input 2 This means ...

Post Posted: July 11th, 2012, 12:58 pm

I think I understand now why due to the reloading which makes sense. You state if they are all in the same form element this will not happen. If I combine both forms into one, I will still have two submit buttons. As you stated, since page gets reloaded, wouldn't this still clear data depending on w...

Post Posted: July 11th, 2012, 11:09 am

I still do not understand

Even if they are ignored, what about the values that had already been found and displayed in the first form

Why are they being cleared

Post Posted: July 11th, 2012, 9:48 am

thanks for the reply

When I send from one form, results are displayed

Whne I send from second form, results are displayed but results from first form disappear.

Why is this happening since I am not resending first form
I would have expected results to still be visible

Post Posted: July 11th, 2012, 2:03 am

Hi All I hope someone can give me some advise. I have the following 2 forms on one web page: [code] <form action="rdns.php" method="post"> <b><font color="#0000ff" face="verdana">Enter Domain Name e.g., mydomain.com:</b...

Post Posted: July 5th, 2012, 10:59 am

I am hoping someone can give me a little insight into a situation I have. I have a PHP script on my website that tries to detect the real visitor IP address using the following environment variables in the following order: [code] $_SERVER['HTTP_CLIENT_IP']; $_SERVER['HTTP_X_FORWARDED_FOR...

Post Posted: July 3rd, 2012, 3:44 pm

I added the following:

Code: [ Select ]
<Files /403.php>
  Order Allow,Deny
  Allow from all
</Files>
  1. <Files /403.php>
  2.   Order Allow,Deny
  3.   Allow from all
  4. </Files>


It did not help

Do I need to add something else

Post Posted: July 2nd, 2012, 9:31 am

I am happy about this but it is a pain having to encode for every image.

Post Posted: July 2nd, 2012, 9:29 am

I simulate the bad bot using my browser

Post Posted: June 30th, 2012, 12:18 am

Hi All If I know the registrar of an IP address is RIPE Network Coordination Centre, then I can get an XML file output of the IP address similar to below: http://apps.db.ripe.net/whois/lookup/ripe/inetnum/77.75.76.115.xml I also need to get the IP information if the registrar is Asia Pacific Network...

Post Posted: June 28th, 2012, 12:30 pm

Hi All Hopefully someone can help me here I created a custom 403 error page In the htaccess file I specified the location. In my htaccess file I added a statement to ban some bad IPs. I also added a Rewrite Condition to ban som bot user agents. If I test my site using a banned IP, my custom 403 erro...

Post Posted: June 26th, 2012, 11:38 am

I finally was able to get my custom 403 error page to display the images.

I had to embed them into the web page using Base64 encoding.

I am still baffled as to why this is the only way I can get the images to be displayed

Post Posted: June 25th, 2012, 10:06 am

I added an href URL link and it worked fine.

I would have expected the img src link to work also but it does not display.

If I paste the image URL into a browser:
Code: [ Select ]
http://www.mydomain.com/images/pic.gif

I can see the image

Any suggestions

Post Posted: June 25th, 2012, 7:52 am

Unfortunately I am with Rogers and do not have a cPanel

Post Posted: June 25th, 2012, 7:27 am

I tried the base URL as follows:
Code: [ Select ]
<head>
<base href="http://www.mydomain.com/images/" />
</head>

<body>
<img src="pic.gif" />
</body>
  1. <head>
  2. <base href="http://www.mydomain.com/images/" />
  3. </head>
  4. <body>
  5. <img src="pic.gif" />
  6. </body>


It did not work. Would not display images

Post Posted: June 22nd, 2012, 3:39 pm

Hi All I have a situation that is really baffling me. I created a custom 403 error document. In this document I use an image where I specify the location by the full URL, not a relative URL as:
Code: [ Select ]
http://www.mydomain.com/images/pic.gif
The 403 error documented is located ...

Post Posted: June 18th, 2012, 3:18 pm

What I want to do is to prevent a banned IP from any access at all to my website.
If they try to access, they should get something like "Forbidden" or You are not allowed access to this website.

I do not want a redirect but only whateverver error message htaccess gives the banned ip.

Post Posted: June 18th, 2012, 6:45 am

This may be hard to believe but I made the mistake of hosting with Rogers and they have no CPanel.

Assuming an IP is banned from my website, is there some type of on-line tool or something that I can use to verify that the IP is indeed banned.

Thanks

Post Posted: June 17th, 2012, 7:50 pm

Hi All I want to ban some IPs to my website using htaccess but I am finding many ways. I need someone to advise which would be the best. First I found the following: [code] <Limit GET POST HEAD> Order Allow,Deny Allow from all deny from 66.66.0.1 deny from 66.66.0.2 den...

Post Posted: June 3rd, 2012, 9:20 pm

I have some special features that promote my website and so I want people to get to my home page first so that they can employ them. If they can go direct, then my website loses it promotional features as anyone can access them directly and so would lower my coverstion rating and ROI.

Post Posted: June 3rd, 2012, 7:49 pm

Hi All When someone accesses my home page, there are various links they can press to access either an HTML page, PHP page or combination HTML and PHP page. What I want to do is to allow access to these pages only if the links are clicked within my website. The reason I want this is because I do not ...
  • Sort by
 
 

© 1998-2016. Ozzu® is a registered trademark of Unmelted, LLC.