Please help me figure out why my server is not running.

  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

Hello,

I have a D-Link DI-624 Router. I want people to be able to access my computer, aka acting like a server. The only way for them to do that though, is through the router and my wireless adapter.

I installed XAMPP on my Windows XP Professional machine which installs Apache, SQL, and other things. I configured my router's ports to what it said to configure it to.

For some reason, I can only access the server, through my IP address. (I was never able to access it without setting up the server).

No one else can access it. :(

I know I did it properly. I there else I need to do?

Please tell me why it's not working.

Thanks,
Craig
  • Anonymous
  • Bot
  • No Avatar
  • Posts: ?
  • Loc: Ozzuland
  • Status: Online

Post 3+ Months Ago

  • UPSGuy
  • Lurker ಠ_ಠ
  • Web Master
  • User avatar
  • Posts: 2733
  • Loc: Nashville, TN

Post 3+ Months Ago

So you show the Apache service as running, but nobody else can type in your IP and get access? No offense meant, you don't mean 127.0.0.1 as that IP address do you? don't hate...just trying to figure out where to start...
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

Of course not 127.0.0.1...that's the exact same thing as localhost lol.

They can't access my IP. It doesn't make sense...but I can access it. :(

Is there a setting on the router I need to change..?

Here's a link to a demo of the settings of the router I have:

http://support.dlink.com/emulators/di62 ... izard.html

Thanks,
Craig
  • ATNO/TW
  • Super Moderator
  • Super Moderator
  • User avatar
  • Posts: 23456
  • Loc: Woodbridge VA

Post 3+ Months Ago

Either disable your firewall, or configure your firewall to give their IP addresses permission.

They should also be able to access your computer by typing http://yourcomputername/

Also try pinging your IP from their machines. But I'd be fairly certain you have a firewall that's blocking them. This is specifically why I always disable the XP firewall. It sucks, and there are very limited configuration options.
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

It doesn't work even if my firewall is off. ;)

Does my httpd.conf file need to be changed? I see something about virtual host?

And also...is it because I am using a wireless adapter that this isn't working? I'm trying to do this all wirelessly, otherwise, I can't do it. :(

Quote:
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs-2.0/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "C:/Program Files/XAMPP/xampp/apache"

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
#ScoreBoardFile logs/apache_runtime_status

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/httpd.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80



#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_ldap_module modules/mod_auth_ldap.so
#LoadModule autoindex_module modules/mod_autoindex.so
LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/util_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule mod_ssl.c>
# LoadModule log_sql_ssl_module moduels/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so


### For PhpBB and PhpEclipse support
EnableSendfile Off
EnableMMAP Off

<IfModule mod_dav.c>
<IfModule mod_dav_fs.c>
Include conf/moddav.conf
</IfModule>
</IfModule>

<IfModule mod_auth_mysql.c>
Include conf/mod_auth_mysql.conf
</IfModule>

<IfModule mod_auth_remote.c>
<Directory "C:/Program Files/XAMPP/xampp/htdocs/fonts">
AllowOverride All
AuthType Basic
AuthName "AUTH REMOTE TEST"
AuthRemoteServer 127.0.0.1 # like http://www.home.net
AuthRemotePort 80
AuthRemoteURL /forbidden/ # like http://www.home.net/forbidden/
require valid-user
##### user:pass
</Directory>
</IfModule>

<IfModule mod_ssl.c>
Include conf/ssl.conf
</IfModule>

Alias /webalizer "C:/Program Files/XAMPP/xampp/webalizer/"
<Directory "C:/Program Files/XAMPP/xampp/webalizer">
Options Indexes ExecCGI
AddHandler cgi-script .cgi .exe
Order allow,deny
Allow from all
</Directory>

Alias /security "C:/Program Files/XAMPP/xampp/security/htdocs/"
<Directory "C:/Program Files/XAMPP/xampp/security/htdocs">
DirectoryIndex index.php
AllowOverride All
Order allow,deny
Allow from all
</Directory>


#ScriptAlias /php/ "C:/Program Files/XAMPP/xampp/php/"
#Action application/x-httpd-php "/php/php-cgi.exe"
LoadModule php5_module "C:/Program Files/XAMPP/xampp/apache/bin/php5apache2.dll"

AddType application/x-httpd-php .php .php4 .php3 .phtml

Alias /phpmyadmin "C:/Program Files/XAMPP/xampp/phpMyAdmin/"
<Directory "C:/Program Files/XAMPP/xampp/phpMyAdmin">
Order allow,deny
Allow from all
</Directory>

Alias /excel "C:/Program Files/XAMPP/xampp/htdocs/excel/"
<Directory "C:/Program Files/XAMPP/xampp/htdocs/excel">
Order allow,deny
Allow from all
</Directory>

Alias /pdf "C:/Program Files/XAMPP/xampp/htdocs/pdf/"
<Directory "C:/Program Files/XAMPP/xampp/htdocs/pdf">
Order allow,deny
Allow from all
</Directory>

Alias /csimcache "C:/Program Files/XAMPP/xampp/tmp/"
<Directory "C:/Program Files/XAMPP/xampp/tmp">
AllowOverride None
Order allow,deny
Allow from all
</Directory>

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
ServerName localhost:80

#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Program Files/XAMPP/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Program Files/XAMPP/xampp/htdocs">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks Includes ExecCGI
AddType text/html .shtml
AddHandler server-parsed .shtml
AddHandler cgi-script .cgi .pl

# ReadmeName footer.html
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here.
#
# UserDir "My Documents/My Website"

#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.html.var index.phtml

#
# AccessFileName: The name of the file to look for in each directory
# for access control information. See also the AllowOverride directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig conf/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., http://www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access.log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog logs/access.log combined

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "C:/Program Files/XAMPP/xampp/apache/icons/"

<Directory "C:/Program Files/XAMPP/xampp/apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>


#
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
#
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files/XAMPP/xampp/cgi-bin/"

#
# "C:/Program Files/XAMPP/xampp/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/XAMPP/xampp/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# FancyIndexing is whether you want fancy directory indexing or standard.
# VersionSort is whether files containing version numbers should be
# compared in the natural way, so that `apache-1.3.9.tar' is placed before
# `apache-1.3.12.tar'.
#
IndexOptions FancyIndexing VersionSort

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddLanguage hr .hr

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
#AddDefaultCharset ISO-8859-1

#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See ftp://ftp.isi.edu/in-notes/iana/assignm ... acter-sets for
# the official list of charset names and their respective RFCs
#
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See ftp://ftp.isi.edu/in-notes/iana/assignm ... acter-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz


#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For server-parsed imagemap files:
#
#AddHandler imap-file map

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var

# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can Internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line;
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# C:/Program Files/XAMPP/xampp/apache/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
Alias /error/ "C:/Program Files/XAMPP/xampp/apache/error/"

<Directory "C:/Program Files/XAMPP/xampp/apache/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>

ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".localhost" to match your domain to enable.
#
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from localhost
</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
# ProxyRequests On
#
# <Proxy *>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
# ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
# CacheRoot "C:/Program Files/XAMPP/xampp/apache/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.



# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com:80
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

# Win32DisableAcceptEx ON


Thanks,
Craig
  • Daemonguy
  • Moderator
  • Web Master
  • User avatar
  • Posts: 2700
  • Loc: Somewhere outside the box in Sarasota, FL.

Post 3+ Months Ago

You don't require virtual hosts unless you plan on hosting more than one instance on the same server -- presently you have an actual host.

I need to be more clear of this, so I will summarize, and you tell me if I am off target.

You have a local LAN (wireless) connected via the router. Your Windows 'server' is one of the machines attached to the wireless network and it has a non-internet addressable IP; say something in the 192.168 range.

From that machine itself, you can hit the web site all day long.

What about from other machines on the same LAN? In other words, other computers that co-exist on your home network segment? If you try and hit that machine by its IP, does it come up for them?

You WANT to be able to have this site available for people external to the local LAN (read: Internet).
To that end, you have 'configured' your router to port forward port 80 requests to your external IP (provided by your ISP) to the IP of the windows server.

Does that sound about right?


Another question might be -- why are you posting this in the Unix/Linux forum when you intend to run Windoze? :)
  • ATNO/TW
  • Super Moderator
  • Super Moderator
  • User avatar
  • Posts: 23456
  • Loc: Woodbridge VA

Post 3+ Months Ago

Daemonguy wrote:
Another question might be -- why are you posting this in the Unix/Linux forum when you intend to run Windoze? :)


He didn't. I moved it here. Like I told him, most Windows geeks that I've seen don't even know what apache is. I figured most of the folks that frequent the linux board have tried to or have installed Apache on Windows before and felt he'd get better help in this board since you guys really know what you're doing when it comes to Apache.
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

Daemonguy wrote:
You don't require virtual hosts unless you plan on hosting more than one instance on the same server -- presently you have an actual host.

I need to be more clear of this, so I will summarize, and you tell me if I am off target.

You have a local LAN (wireless) connected via the router. Your Windows 'server' is one of the machines attached to the wireless network and it has a non-internet addressable IP; say something in the 192.168 range.

From that machine itself, you can hit the web site all day long.

What about from other machines on the same LAN? In other words, other computers that co-exist on your home network segment? If you try and hit that machine by its IP, does it come up for them?

You WANT to be able to have this site available for people external to the local LAN (read: Internet).
To that end, you have 'configured' your router to port forward port 80 requests to your external IP (provided by your ISP) to the IP of the windows server.

Does that sound about right?


Another question might be -- why are you posting this in the Unix/Linux forum when you intend to run Windoze? :)


Hmm..cool..question answering time. :D

Yes, anyone who is on the LAN and/or Wireless LAN can access the server.

I have done all the port fowarding things set up in the router. I want the internet to be able to see it, meaning, other people could access my computer.

Thanks,
Craig
  • Daemonguy
  • Moderator
  • Web Master
  • User avatar
  • Posts: 2700
  • Loc: Somewhere outside the box in Sarasota, FL.

Post 3+ Months Ago

Next question; what error do you get when you attempt to view it externally?
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

A timeout error. ;)

Meaning, it's unaccessable. :(
  • Daemonguy
  • Moderator
  • Web Master
  • User avatar
  • Posts: 2700
  • Loc: Somewhere outside the box in Sarasota, FL.

Post 3+ Months Ago

Hmm, well if you can reach it via other local systems ... I presume by placing the IP in the address bar?

I admit I did not read through the entire http.conf you posted -- and now it's gone. :)

What was your servername directive AND what version of Apache are you running again?

If you have the local LAN IP in there, you may want to consider placing in the external IP.

Let's at least knock out any remote possibilities before looking more deeply.

If you feel comfortable, you are welcome to send me the external IP; I can see what I get on this end.

Cheers.
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

What do you mean by servername directive? The version of apache I'm using is 2.0.54.

Um...

instead of giving you the IP address...I can just give you this:

http://javascriptman221.dyndns.org.

You will get a timeout though.

Could the problem be because I'm only using a wireless adapter and not directly connected to the router?

The only way I have access to the internet is by wireless. ;) I also have a wireless range extender, but I doubt that's the cause, because that just boosts the signal.

I know that the router has an IP of 192.168.0.1.

My wireless range extender has a static IP of 192.168.0.30.

My internal IP (static) is 192.168.0.101.

My external IP = 67.84.7.62 (same as router's IP)

Picture:
Image

And if you're wondering, yes, I do share the connection with my neighbor. He allows my family to do so. He actually got me my first wireless adapter for my birthday a year ago or a little longer. Only him and I know the encryption code, so it's not stealing, since he allows us to use it. I can also change any setting on the router I want.

If you were able to access the server, it would appear like this:

Image

As of right now, 10:23 AM EST, Apache is running.

Thanks,
Craig

P.S. I put the httpd.conf code back for ya. ;)
  • Daemonguy
  • Moderator
  • Web Master
  • User avatar
  • Posts: 2700
  • Loc: Somewhere outside the box in Sarasota, FL.

Post 3+ Months Ago

Try this from the outside;

https://javascriptman221.dyndns.org

Works.

There are several interesting things to note, not the least of which is the fact the admin address is different in your config, vs. what is running.

There are a few other subtle differences, and some not so subtle.

Something hinkey is going on.
  • UPSGuy
  • Lurker ಠ_ಠ
  • Web Master
  • User avatar
  • Posts: 2733
  • Loc: Nashville, TN

Post 3+ Months Ago

JSMan...if you're goint to work with security certificates, then you have to do your running around in https. He's right....the https:// functions properly.
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

Daemonguy wrote:
Try this from the outside;

https://javascriptman221.dyndns.org

Works.

There are several interesting things to note, not the least of which is the fact the admin address is different in your config, vs. what is running.

There are a few other subtle differences, and some not so subtle.

Something hinkey is going on.


Wait...it worked?!

And what's this security stuff I'm hearing? :-P

--Craig
  • UPSGuy
  • Lurker ಠ_ಠ
  • Web Master
  • User avatar
  • Posts: 2733
  • Loc: Nashville, TN

Post 3+ Months Ago

I'm being prompted about your security certificate each time I try to enter, so presumably, I thought you were using your own SLL certed to localhost, but I see now that I was wrong. lol
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

hmm?

I don't access it by https lol

Daemonguy wrote:
Try this from the outside;

https://javascriptman221.dyndns.org

Works.

There are several interesting things to note, not the least of which is the fact the admin address is different in your config, vs. what is running.

There are a few other subtle differences, and some not so subtle.

Something hinkey is going on.


Can you explain what you mean my admin address is different in my config vs. what is running.

and the subtle differences...they are??

By the way...what do you mean by "works"...?

Were you able to access my server? Because I tried going on dialup on my dad's computer, and I wasn't able to access it. I can only access with computers that are on the same network still.

Unless I'm wrong...maybe you could access it...but why can't anyone else. Does my IP have to resolve around the entire web, kind of like how a domain name works? Does that mean I have to leave my computer running until everything sees my IP address?

Thanks,
Craig
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

oh..ok

you are right! https works!!

my friend said that it only works because my apache is using mod_ssl

How do I not use that and make it so I can access it without a secure connection?

--Craig
  • AnarchY SI
  • Web Master
  • Web Master
  • User avatar
  • Posts: 2521
  • Loc: /usr/src/MI

Post 3+ Months Ago

well, mod_ssl & openssl
but ssl stands for secure sockets layer so i would have thought thatd be a little more obvious ;)

but using it for the transfer of non-critical information hasn't much of a point.
  • UPSGuy
  • Lurker ಠ_ಠ
  • Web Master
  • User avatar
  • Posts: 2733
  • Loc: Nashville, TN

Post 3+ Months Ago

your friend is correct.

quoted from the mod_ssl documentation:
Quote:
Is it possible to provide HTTP and HTTPS with a single server?

Yes, HTTP and HTTPS use different server ports, so there is no direct conflict between them. Either run two separate server instances (one binds to port 80, the other to port 443) or even use Apache's elegant virtual hosting facility where you can easily create two virtual servers which Apache dispatches: one responding to port 80 and speaking HTTP and one responding to port 443 speaking HTTPS.

I know that HTTP is on port 80, but where is HTTPS?

You can run HTTPS on any port, but the standards specify port 443, which is where any HTTPS compliant browser will look by default. You can force your browser to look on a different port by specifying it in the URL like this (for port 666): https://secure.server.dom:666/


With this in mind, you do need that virtual hosting after all. OK, someone else needs to take it from here...I've never tried to run with virtual hosting.
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

Heheheh....

I figured. :)

Edit: damn...I have no idea what to change in the httpd.conf file. :(

--Craig
  • Daemonguy
  • Moderator
  • Web Master
  • User avatar
  • Posts: 2700
  • Loc: Somewhere outside the box in Sarasota, FL.

Post 3+ Months Ago

Just having mod_ssl loaded will not immediately initiate port 443 connections; you have to have it configured in the httpd.conf.

The one you display, does not AND as previously mentioned, the serveradmin is different than what I get off the server.

Some directories don't seem to mesh as well.

This leads me to believe the config you displayed is not the one currently running the web server.
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

What do I change in my httpd.conf file? (It's on the first page of this topic.)
  • AnarchY SI
  • Web Master
  • Web Master
  • User avatar
  • Posts: 2521
  • Loc: /usr/src/MI

Post 3+ Months Ago

i believe what daemonguy is implying is you should search your server's directory for "httpd.conf" to make sure there's only one and the one you posted is the one your server is using.

what directory is the httpd.conf file you posted in?
  • javascriptman221
  • Proficient
  • Proficient
  • User avatar
  • Posts: 350
  • Loc: New Jersey

Post 3+ Months Ago

root/apache/conf ;)

I believe that's the right one though, because when I changed the email it changed on the server. :?

--Craig
  • aakashcr
  • Born
  • Born
  • aakashcr
  • Posts: 1

Post 3+ Months Ago

hey how do you get a input from the user in another system ?
i have connected the system through lan . i have a software that i have made a web interface of. mine is a linux mint 5.0 machine and i wanted people to use it in intra net . but the file on the remote computer is not getting passed . until i share it .. can i do it without sharing . i need to run local files
  • kc0tma
  • o|||||||o
  • Web Master
  • User avatar
  • Posts: 3318
  • Loc: Trout Creek, MT

Post 3+ Months Ago

Create a web page, then have the other user visit the web page. When they click a link or something (what ever you want) it can run a script on the server, either a compiled program or some sort of interpreted script with perl or php or something. The details of doing that can be made more specific if you give us more details and if you visit the programming and scripting forum.

Post Information

  • Total Posts in this topic: 27 posts
  • Users browsing this forum: No registered users and 102 guests
  • You cannot post new topics in this forum
  • You cannot reply to topics in this forum
  • You cannot edit your posts in this forum
  • You cannot delete your posts in this forum
  • You cannot post attachments in this forum
 
 

© 1998-2014. Ozzu® is a registered trademark of Unmelted, LLC.